User guide

Chapter 2: Installation 11
Installing an OutLook 180DX
The diagram below illustrates one possible configuration for your OutLook
180DX switch. Follow the step-by-step instructions to properly install your
new switch.
Figure 2.2: Installation Example
WARNING: To reduce the risk of electric shock or damage to your equipment:
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
100-240V -AC|1-.5 A
1
2 3 4 5 6 7 8
User A
OutLook 180DX
PS/2 Reset button
DB9 serial port for
updating firmware
Servers 2-8
Server 1