User guide
26 OutLook 180DX Installer/User Guide
Flag Appearance Settings
Setting Values Effect
Enabled Flag Off Flag does not appear.
Ports On Flag displays computer by port number.
Names On Flag displays computer by name.
Ports Timed Port number appears for ve seconds after switching.
Names Timed Name appears for ve seconds after switching.
Row Ø-14 Position the ag vertically on the screen.
Column Ø-25 Position the ag horizontally on the screen.
Color Ø-7 Set the ag color.
Text Ø-7 Set the ag text color.
To access the Flag Conguration screen:
1. Press Print Screen then F2 to access the Advanced Menus screen.
2. Highlight Setup - Flag and press Enter. The Flag Conguration screen appears.
Figure 3.6: Flag Configuration Screen
To change the status ag display:
1. Highlight Setup - Flag in the Advanced Menus screen and press Enter. The
Flag Conguration screen appears.
2. Highlight the settings you want to change and use the Plus ( + ) or Minus
( – ) keys to adjust the values. The Flag Appearance Settings table
describes each of the available menu attributes.
3. Press Enter to save the settings and exit the menu.
Setting User Console Security
Use the Security Configuration screen to secure your user station. You can
establish a screen saver mode that engages after your station remains inactive
for a user-specified time. Once engaged, your station will remain locked until
you press any key or move the mouse. You will then need to type in your
password to log back in to the system.