尺寸：4*4inch 材质：80书纸 印刷：单黑 FLIGHTFORCE GD-90WP A803W User Manual ™ HD/WI-FI DRONE for ages 14+
TABLE OF CONTENTS Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Replacing The Propeller Blades . . . . . . . . . .
CAUTION • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DRONE WARNINGS: 1. The Drone is designed for INDOOR or OUTDOOR flight. 2. The Drone’s blades revolve at high speeds and can cause damage to the user, spectators and animals. Stand away from the Drone to reduce the risk of getting into the flight path and always maintain visual contact with the Drone while flying. 3. Warn spectators that you will be flying your Drone so that they are aware of its position. 4.
CAUTION: DO NOT ATTEMPT TO FLY THE DRONE IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND MAY CAUSE BODILY HARM. WARNING DO NOT FLY THE DRONE IN FOUL WEATHER! WARNING! • Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades. • Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position. • Not suitable for children under 14 years old. Parental supervision recommended when flying the Drone.
BATTERY WARNINGS RECHARGEABLE BATTERY (DRONE): This device contains a removable Lithium-Polymer battery. The included charger is built specifically for the HD/WI-FI Drone Li-Poly battery. Do not use it to charge any other battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal. BC DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2.
WARNING 1. Close supervision is necessary when this appliance/product is used by or near children or mentally disabled individuals. 2. Use this unit only for its intended use as described in this manual. 3. Unplug this unit during lightning storms or when unused for long periods of time. 4. Never drop or insert an object into any opening. 5. Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. 6.
9. Do not overload the electrical outlet. Use only the power source as indicated. 10. Do not carry this unit by its cord or use the cord as a handle. 11. Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit’s power supply cord or plug is damaged, do not attempt to fix it yourself. 12. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit.
FCC INFORMATION Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation.
LOCATION OF PARTS AND CONTROLS 1. Propeller 2. Upper Body 3. Bottom Body 4. Guard Frame 5. Motor 6. HD Camera 7. Antenna 8. Battery 9.
LOCATION OF PARTS AND CONTROLS Home Rotate Speed G sensor Fixed Height Photo Video Controls On/Off Pitch Trimmer Direction Throttle Roll Trimmer Home Rotate Auto Landing Speed Yaw Trimmer G sensor Non-Fixed Height Photo Video Controls On/Off Pitch Trimmer Direction Throttle Roll Trimmer 10 Throttle Return (On/Off) Yaw Trimmer
MOBILE WI-FI CONTROL OPERATING INSTRUCTIONS 1. Go to the iTunes® App StoreSM (for Apple devices) or Google PlayTM (for Android devices) and download the HDWIFI App. 2. Power on the HD/WI-FI Drone, the LED indicator will flash white as the drone waits to be connected to a device. 3. Go to Settings on your device and turn Wi-Fi on. The HD/WI-FI Drone will appear as an available connection. 4. Select the HD/WI-FI Drone to confirm the connection. 5. Exit out of Settings and open the HDWIFI app. 6.
7. Choose a flying mode (Fixed Height / Non-Fixed Height) by switching icon. 8. Tap to turn the controls on, the LED indicator will change to solid white and the HD/WI-FI Drone is ready to fly. Fixed Height During the flight, when click the button “ drone will be landed automatically. ” any time, the Non-Fixed Height The default status is always in “ ”, the throttle will remain at a constant height when take the thumb away.
CHARGING DRONE BATTERIES USE THE WALL CHARGER TO CHARGE THE DRONE BATTERY LED Indicator USB Charging Cable 3.7V 300mAh Li-Polymer Battery 1. Separate the battery cable and connect it to the charger. 2. Use the USB charging cable to connect the battery to a USB power source, such as a laptop. A full charge takes about 40 minutes. After fully charged, the drone will fly about 5 minutes. 3. The A/B indicator match the A/B charging status. When charging, the relevant indicator will light up.
CAUTION LED Indicator LED Charging Idle and Charge Completion Charger Specifications Input Charging Current Full Voltage 5V 420-450mA 4.2+0.03V BATTERY AND CHARGER SPECIFICATION Battery usage and charge duration reference 14 Battery Type Lithium-Polymer Battery Battery Specification 3.7V 300mAh Drone Flight Time Approx. 4-6 Minutes Charge Time Approx. 40 Minutes (Charging current approx. 0.
GETTING READY TO TAKE OFF Li-Polymer Battery 3.7V 300mAh Flat Surface Step 1 Insert the battery into the drone, and plug the battery wire into the drone. When the two indicator lights are flashing, put the drone flat on the ground. Step 2 Open the App. The first time after installation, default is: Non-Fixed Height; For future, the default would be depend on the last flight status (Fixed Height or Non-Fixed Height). Step 3 Choose a flying mode (Fixed Height / Non-Fixed Height) by switching icon.
Step 4 Tap to turn the controls on, the LED indicator will change to solid white and the HD/WI-FI Drone is ready to fly. Important: Make sure the drone is placed on a flat surface. After connecting, the gyroscope will need to be calibrated before take off. CALIBRATION INSTRUCTION Steps: 1. Make sure the drone is placed on a flat surface. 2. After connecting, pull the two rockers (on the App) to the lower right corner for 2-3 seconds for calibration. 3.
BASIC MANUEVERS AND PRACTICE EXERCISES PLEASE PRACTICE AND LEARN CONTROLS BEFORE ACTUAL FLYING Please be familiar with the unit before you fly it. Read the instructions carefully, get familiar with all controls, and keep repeating until you are confident with these controls. 1. Place the drone in a clear open space with the tail of drone pointing to you. 2. Practice operating the control sticks (as shown below).
Direction Turn right Elevator Fly forward Throttle Ascent Rudder Move left Turn left Fly backward Descent Move right 18
THROTTLE CONTROL PRACTICE 1. Move the throttle (on the left side of the screen) to the middle to lift the drone a few feet off the ground. Lower the throttle to slowly land the drone again. Repeat until you are comfortable with this action. 2. To practice hovering flight, try to keep the drone steady just 2-3 feet off the ground.
DIRECTION CONTROL PRACTICE • Practice flying forward and back using the directional control panel (on the right side of the screen). Keep a low height and practice moving a few feet in each direction. If the drone flies away, please lower the throttle stick (on left) to land the drone.
RUDDER CONTROL PRACTICE 1. Slowly raise the throttle stick. 2. Move the nose of the drone right or left. Then slowly move the rudder stick in the opposite direction to fly back to the original position. PRECISION CONTROL PRACTICE Once you are familiar with all actions from the above exercises, practice within a circle to improve your accuracy. Reduce the size of the circle as you become more familiar with the controls.
CORRECTING FLIGHT USING PRE-PROGRAMMED MOVEMENTS Slowly raise the throttle stick as the drone lifts off the ground. You can use the pre-programmed movements to correct the actions. These controls are the slider bars next to the throttle and directional control pads. 1. Correcting using Rotational movement As the drone lifts off, the nose may lean left or right. When the drone leans right, adjust the trim to left side. When the drone leans left, adjust the trim to right side.
2. Correcting using Forward/Backward Tilt movement As the drone lifts off, the nose may lean forward or backward. When the drone leans forward adjust the tilt back. When the drone leans backward, adjust the tilt forward. Fly forward Fly backward 3. Correcting using Side Step Movement As the drone lifts off, if the unit may shift left or right. When the drone shifts right, side step to left side. When the drone shifts left, side step to right side.
REPLACING THE PROPELLER BLADES The HD/WI-FI Drone’s propeller system is a precision instrument that may need repair or replacement for optimal flight function. Crash landing from high-speed aerial flights may cause damage to your HD/WI-FI Drone’s propellers. 1. Before making any repairs, turn off the power and disconnect the battery. 2. The HD/WI-FI Drone has four blades labeled with an embossed F or R, two white propellers on front, and two black propellers on the rear. 3.
TROUBLESHOOTING Problem Cause Solution 1 After connecting the drone to the battery, the LED indicators keep flashing, but there is no response when operating Unable to pair to App Pair the App and drone according to the instruction 2 No response after battery is connected to drone 1. Check if the power of remote control or receiver is connected 2. Check the remote control and receiver voltage 3. Poor contact on battery terminals 1.
Problem Cause Solution 5 Main rotor spins but is unable to take off 1. Deformed propellers 2. Drone battery depleted 1. Replace main propellers 2. Charge or replace with a fully charged battery 6 Strong vibration of drone Deformed propellers Replace main propellers 7 The drone still keeps turning after rudder trim, or inconsistent speed during side step 1. Damaged rotors 2. Damaged drive motor 1. Replace the main wing 2.
CARE AND MAINTENANCE • Always disconnect the battery from the drone when it will not be used for an extended period of time. • To clean, gently wipe the drone with a clean damp cloth. • Parental guidance recommended when installing or replacing the batteries. DRONE SPECIFICATIONS Li-Poly Rechargeable Battery: 3.
ONE(1) YEAR LIMITED WARRANTY Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.
Find thousands more great ideas online 317907, 317908 Merrimack, New Hampshire, USA 03054 • 800-846-3000 • Brookstone.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
