User Manual

Slowly raise the throttle stick as the drone lifts off the ground.
You can use the pre-programmed movements to correct the
actions. These controls are the slider bars next to the throttle and
directional control pads.
The HD/WI-FI Drone’s propeller system is a precision instru-
ment that may need repair or replacement for optimal flight
function. Crash landing from high-speed aerial flights may
cause damage to your HD/WI-FI Drone’s propellers.
1. Before making any repairs, turn off the power and
disconnect the battery.
2. The HD/WI-FI Drone has four blades labeled with an
embossed F or R, two white propellers on front, and two
black propellers on the rear.
3. When replacing the propeller blades, gently remove the
blade from the rotor shaft. Make sure to match the
indication letter on the blade with the letter on the drone.
4. Replace the damaged blade with the new blade.
REPLACING THE PROPELLER BLADES
1. Correcting using Rotational movement
As the drone lifts off, the nose may lean left or right.
When the drone leans right, adjust the trim to left side.
When the drone leans left, adjust the trim to right side.
2. Correcting using Forward/Backward Tilt movement
As the drone lifts off, the nose may lean forward or backward.
When the drone leans forward adjust the tilt back.
When the drone leans backward, adjust the tilt forward.
3. Correcting using Side Step Movement
As the drone lifts off, if the unit may shift left or right.
When the drone shifts right, side step to left side.
When the drone shifts left, side step to right side.
24