Instructions / Assembly

Page 5Rev. 031320
1-888-651-3431
Pull the rst pin on the ramp while extending the ramp to the
upright position. The ramp may be locked in place at this
position, tting the second pin into the ramp bracket. Pull the
second pin to release it from the bracket, extending it into the
loading position.
Make sure the ramp is folded down and secured in the carrier bed. Remove the pin and clip in the
folding hitch tube. Carefully rotate the carrier into the upright position. Replace the pin and clip in the
appropriate hole in the hitch tube.
Extending the Ramp
Folding the Carrier