Instructions / Assembly

Page 5Rev. 062118
DiscountRamps.com • 1-888-651-3431
Wheel Straps: Fasten the bike wheels to the tray using the straps provided. Thread each strap
around the bike tire and carrier, then through the strap buckle. Pull the strap so it is tight, then attach
to the Velcro tab.
Clamp Arms: Adjust each clamp to t your
bike frame and tighten the knob securely.
Tilt Down: To tilt down the carrier, pull the top
knob to release the stopper mechanism.
Use/Installation
This carrier is designed to t into a
standard 2"x2" hitch receiver.
Step 1. Slide the carrier into the hitch
receiver.
Step 2. The hitch has two holes, A
and B. Align the hitch receiver hole
with the hitch pin hole that best suits
your vehicle.
Step 3. Slide in a hitch pin (sold
separately) and secure with its spring
clip.
Warning: Do not install on trailers
or campers.