User guide

2
Automation Products Group, Inc.
1025 West 1700 North Tel. [phone]
Logan, UT 84321 USA Fax [phone]
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
ACF-10 Acoustical Flow Sensor for Solids
APG
Automation Products Group, Inc.
®
■
Ordering Information
ACF -
Configuration
10 Flow Sensor, Standard Duty
■
Dimensions — in./mm
■
Wiring
■
Specications
Performance
Operation Characteristics
Sensitivity Adjustment: By offset and gain
trim potentiometers
Operation Indication: (4) LEDs (Red -
detection of noise. Four red - relay will trip)
Alarm Output: Relay contact rating:
240 V 2 A AC; 30 V 2 A DC (resistive)
Electrical
Supply Voltage: 22 VDC to 264 VAC inclusive
(50/60 Hz AC) Withstand Voltage 1500 VAC
for 1 min. (between line and output) Insulation
Resistance 500 VDC, 100 m ohm (between
line and output)
Power Consumption: Approx. 2.5 VA
(at 100 VAC)
Physical
Material: ABS, Polycarbonate PC
Mounting: (2) straps or screws
Wiring: PF1/2 cable gland
Rating: IP54/NEMA 12
Environmental
Operating Temperature Range: 14 to 158°F
(-10 to 70°C)
Operational Humidity: 5 to 85% RH
Shock Resistance: 60 to 2000 Hz, 10 g
Specifications are subject to change without
notice.
4.21
107
1.97
50
1.65
42
0.02
0.5
3.15
80
1
Supply Voltage: 24-264V AC/DC
Relay Contact Output: 240V 2A AC
(resistive load)
2 3
NO
4
Line
1
6
5432
NON
DETECT
ZERO RY ON
DELAYDELAYGAINOFFSET
OFFON
DETECT
Calibration