Owner's manual

ManualsBrandsAPG ManualsEquipmentPG-5000 datasheet

Automation Products Group, Inc.

1025 West 1700 North Tel. 1/888/525-7300

Logan, UT 84321 USA Fax 1/435/753-7490

w w w . a p g s e n s o r s . c o m

s a l e s @ a p g s e n s o r s . c o m

PG-5000 Digital Pressure Gauge

APG

Automation Products Group, Inc.

PG-5000

■

Large, full 4 digit display

with 0.5 in. characters

■

Available ranges from vacuum

up to 500 psi, and from 0 up to

10,000 psi

■

Microprocessor-based circuit has

“TARE” capability standard

■

Display capability to 9999

■

Self-powered by standard 9 V

battery

■

±0.25% accuracy of full scale (on

selected ranges)

■

Gauge reference pressure

■

Internally compliant to CE

■

On/oﬀ button

Digital Pressure Gauge

Options

■

Other units of measure available

■

Other process connection ﬁttings

available

■

16-minute auto-oﬀ optional at no

extra cost

■

Rear pressure port

■

Peak-hold

■

Zero adjust knob

■

0-2 VDC output (battery

powered)

■

4-20 mA output (loop powered)

■

0-5 VDC output (external power)

■

Up to ±0.1% full scale accuracy

with NIST certiﬁcation, on

selected ranges

■

Cleaned for oxygen service

■

For OEM applications or other

conﬁgurations, consult factory

Accessories

■

Panel mount ﬂange (rear pressure

port only)

■

AC to DC external power supply

■

Shock dampening rubber boot

■

Operational Description

Battery powered digital gauge

oﬀers full four digit display.

e PG-5000 four-digit display

unit incorporates an all-stainless

steel sensor. e sensor is resistant

to most typical exposures of

vibration and shock. e APG

gauge is also less sensitive to the

eﬀects of pulsating pressures, a

major advantage when compared

to vibration sensitive dial gauges.

Available options include peak hold,

4-20 mA two wire, 0-2 VDC, and

0-5 VDC outputs.

■

Applications

No special tools or adaptors

are required for installation of the

PG-5000. is makes the unit an

easy, cost eﬀective replace ment for

less accurate, standard mechanical

gauges. e unit’s long life, ease

of operation, high accuracy, and

low cost make it perfect for all

applications where standard 2.5 in.

or larger mechanical gauges have

been used.

Rev. 10.08

Summary of content (4 pages)

PAGE 1
APG Rev. 10.08 PG-5000 Digital Pressure Gauge ® Automation Products Group, Inc. Accessories ■ Panel mount flange (rear pressure port only) ■ AC to DC external power supply ■ Shock dampening rubber boot ■ Battery powered digital gauge offers full four digit display. The PG-5000 four-digit display unit incorporates an all-stainless steel sensor. The sensor is resistant to most typical exposures of vibration and shock.
PAGE 2
APG PG-5000 Digital Pressure Gauge ® Automation Products Group, Inc. ■ Specifications ■ Performance Standard Pressure Ranges Compound Gauge: From vac up to 500 psi Gauge: From 0 to 10000 psi Absolute @ ±0.25% Linear Accuracy: From 0 to 5000 psi Absolute @ ±0.1% Linear Accuracy: From 0 to 10000 psi Overpressure: 2x full scale Burst Pressure: 10x full scale or 20,000 psi (whichever is less) Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.
PAGE 3
APG PG-5000 Digital Pressure Gauge ® Automation Products Group, Inc. Dimensions — in./mm 1.55 39.4 OPTIONAL ZERO ADJ. KNOB PG-5000 Pin Out Table ring: 2.66 67.6 6 Pin Circular Accuracy: S A PSI Z S B C D E F Tip Ctr Automation Products Group Body Date: PSI Mfg.
PAGE 4
APG PG-5000 Digital Pressure Gauge ® Automation Products Group, Inc. ■ Option Tables ■ Ordering Information PG-5000 – Range – Unit of Measure Table – – – – – – – – – – – There are 9 choices available: psi ▲ kPa inHg bar inH2O* kgcm2 mbar* mmHg* fsw G2 High resolution gauge CG Compound gauge V Vac A Absolute S Sealed See Unit of Measure Table See Pressure Type Table Auto Off Pressure Type Table Gauge ___ Pressure Type G-S *Requires G2 option.