Instruction manual

188
This screen shows a twelve segment peak level meter for each channel.
When there is an overload the clip on that channel is indicated with a “!”.
When the unit receives a command from a remote controller, “RC” will
light for half a second. We recommend that this screen be selected when
set up is complete.
Metering
There is one screen for each of the eight channels. Each screen indicates
Channel number, gain, status for Polarity Reverse, Pad, Low Cut Filter, and
Phantom Power functions. A check mark under the function indicates that it
is active. A dash indicates that it is not active.
The Input Gain is adjustable from 26 to 65dB.
Channel Status and Input Gain
Page 6
Aphex Systems Ltd. Model 188