User guide

Local Administrative Options
34 Avaya 1600 Series IP Deskphones Installation and Maintenance Guide
3. Press the * button to terminate the procedure, or the # button to save the new value. If you
press the # button, the telephone displays the following text:
The telephone saves the new value.
Pre-Installation Checklist for Static Addressing
Before performing static addressing, verify that all the requirements listed in the Verify These
Network Requirements section of the Pre-Installation Checklist are met. You do not have to
consider item 4.
on page 13, as it refers to the DHCP server. In addition, you must have the
values for the following parameters. Failure to do so can cause data entry errors that prevent
the telephone from working. Such errors can also have a negative impact on your network. Print
copies of this checklist for each subnet.
New value being saved
1. The IP address of the media server.
2. The transport layer port number of the address of the Management Complex
(media server/gatekeeper). Although this can be a value between 0 and 65535,
the default value is 1719. Do not change this value unless it conflicts with an
existing port assignment.
3. The IP address of the gateway/router.
4. The IP netmask.
5. The IP address of the HTTP server.