User guide

Static Addressing Installation
Issue 4 February 2010 37
8. Press the # button to continue the procedure without changing the displayed status of
802.1Q
The telephone displays the following text:
where dddd is the current system value of the 802.1 VLAN ID.
9. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.
The telephone displays the following message:
where ddd is the number of seconds to wait for the DHCPOFFER on a non-zero VLAN.
10. Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.
The telephone displays:
11. Press the # button to save the new values you entered.
The telephone displays:
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the HTTP server after you enter static
addressing information, you must reenter your static addressing information.
VLAN ID=dddd
New=_
VLAN test=ddd
New=_
Save new values?
*=no #=yes
New values
being saved