User guide

Scenarios for the Restart Process
Issue 4 February 2010 75
Boot File Needs to be Upgraded
The telephone automatically downloads an upgraded boot file if applicable. In this case, these
messages appear:
The telephone displays:
While the hardware is being initialized, the telephone displays:
While either the application file if there is one or the boot code is uncompressed into RAM,
the telephone displays:
This message counts the seconds as the application file (replboot_v3.app in this example)
is being written into RAM.
When control is passed to the software that was just loaded, the following messages
display:
This message continues while the new boot code is being written into RAM.
The telephone displays the speed of the Ethernet interface in Mbps, that is, 0, 10, or 100.
The message No Ethernet displays until the software determines whether the interface is
10 Mbps or 100 Mbps.
Restarting...
Initializing
Loading: 5 secs
replboot_v3.app 4084KB
Starting...
Updating boot code...
DO NOT UNPLUG THE PHONE!