ACS-2695 Box PC User Manual Release Date Revision Nov. 2012 ® 2012 Aplex Technology, Inc. V1.0 All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw ACS-2695 User Manual URL: www.aplex.com.
Warning!_______________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Packing List Accessories (as ticked) included in this package are: □ AC power cable □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to avoid your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on. Always disconnect power when the system is not in use. ◆ Disconnect power when you change any hardware devices.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Packing List...................................................................................................................3 Safety Precautions........................................................................................................3 Chapter 1 Getting Started 1.1 Specifications………………………………………….………….……...…..6 1.2 Dimensions…………………………………...……………….…………......
4.5 Microsoft .NET Framework 3.5 Service Installation…………………...95 Figures Figure 1.1: Dimensions of the ACS-2695 (DC input)………………………...7 Figure 1.2: Dimensions of the ACS-2695 (DC input / DVD Device)…………8 Figure 1.3: Dimensions of the ACS-2695 (AC input).....................................9 Figure 1.4: Dimensions of the ACS-2695 (AC input / DVD Device).............10 Figure 1.5: Left-front View of ACS-2695……………………………….......11 Figure 1.6: Right-front View of ACS-2695………….………………………....11 Figure 1.
Chapter 1________________Getting Started 1.1 Specifications Specs ACS-2695 CPU Socket G2, 2nd Generation Intel Core i7/i5/i3, up to i7 2620M System Chipset Intel QM67 PCH System Memory 2 x 204 Pin DDR3 SO-DIMM, default 4GB (one slot), up to 16GB 1066/1333MHz External I/O Port 2 x DB9 RS-232 (COM1.2) 1 x DVI-I 2 x RJ45 GbE LAN 4 x USB 2.
1.2 Dimensions Figure 1.
Figure 1.
Figure 1.
Figure 1.
1.3 Brief Description of the ACS-2695 The ACS-2695 is a Fan-less High-efficiency Thermal Solution Box PC, powered by Socket G2, 2nd Generation Intel Core i7/i5/i3 processor and supporting 4 x USB 2.0 ports, 4 x COM Ports, 1 x DVI-I, support 2 x SATA HDD space, 1 x external CF slot, 9~32V wide-ranging power input etc. It is ideal for Industrial Automation, Factory Automation, Machine Vision, Process Control, Data Terminal, TI, Surveillance, etc.
1.4 Installation of HDD Step 1 There is one screw which connects to the chassis. Pull out the chassis towards the I/O side after unscrewing as shown in the picture ACS-2695 Step 2 There are 2 screws to deal with when enclosing or removing the HDD bracket as shown in the picture ACS-2695 Loosen screw and draw the HDD bracket out as shown in the picture ACS-2695 Step 3 Tighten the 1 screw as shown in the picture. That’s how it should look after it has been installed.
1.5 Installation of PCI Add-on Step 1 There is one screw which connects to the chassis. Pull out the chassis towards the I/O side after unscrewing as shown in the picture ACS-2695 Step 2 Now slide the add on into the PCI slot, making sure the golden part faces the slot. When the part that is interfaced together come into the right contact, slightly push the add on into the rail of the slot.
1.6 Installation of Wall Mount Bracket Figure 1.
Figure 1.
Figure 1.
Figure 1.
Figure 1.
Chapter 2__________Hardware Installation 2.1 Mainboard Specifications Figure 2.1: Mainboard Overview Figure 2.
Figure 2.
Figure 2.
Specifications Board Size 170mm x 170mm CPU Support Support Socket G2,2nd Gen Intel Core i3/i5/i7 Processor Chipset Intel QM67 Memory Support 2 x SO-DIMM (204pins), up to 16GB DDRIII 1066/1333/1600MHz FSB Graphics Intel HD Grapics 2000/3000 Super I/O Winbond W83627UHG BIOS AMIBIOS 16M Storage 1 x SATA2.0 Connector 1 x SATA2.0 Connector (option) 2 x SATA3.0 Connector 1 x CFAST Slot (option) 1 x MSATA Connector (option) Ethernet 2 x PCIe Gbe LAN by Intel 82574L USB 4 x USB 2.
Support Line-out, MIC by JACK1 Support Line-in, Line-out, MIC by 2x6-pin header Keyboard /Mouse PS2 K/B and Mouse by MIO2 1 x PS/2 keyboard 1 x PS/2 mouse Expansion Bus 1 x PCI-express x16 extend by 4x30 pin socket 2 x PCI-express x1 extend by 4x10 pin socket 1 x mini-PCI-express slot 1 x CRT 2x5 Pin Header Power Management 1 x 3-pin power input connector (Wide range DC+9V~32V) 1 x ATX Power Input （2x2Pin and 3Pin, option） DC5V/12V output by 1x4 pin Connectors Switches and LED Indicators Power on/off
2.2 Jumpers Setting and Connectors 1. RTC1/SRTC1: (2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will permanently reset old BIOS settings to factory defaults. RTC1/SRTC1 CMOS Open or （RTC1Pin1-SRTC1 Pin close） NORMAL (Default) Close 1-2 Clear CMOS Procedures of CMOS clear: a) Turn off the system and unplug the power cord from the power outlet.
4. PS_ON: (2.0mm Pitch 1X3 Pin Header),ATX Power and Auto Power on jumper setting. 5. PS_ON Mode Close 1-2 Auto Power on (Default) Close 2-3 ATX Power DCIN: (5.08mm Pitch 1x3 Pin Connector),DC9V ~ DC32V System power input connector。 6. ATX12V_IN Pin# Power Input Pin1 DC+9V~32V Pin2 Ground Pin3 FG (ATX Power option): (2x2 Pin Connector),DC12V System power input connector.
7. ATX (ATX Power option): (2.0mm Pitch 1X3 box Pin Header), connect PSON and 5VSB and Ground signal,support ATX Power model. Reserved. 8. Pin# Signal Name Pin1 ATX PSON Pin2 ATX Ground Pin3 ATX 5VSB DC_OUT: (2x2 Pin Connector),DC12V and DC5V System power output connector. 9. Pin# Power output Pin1 DC+12V Pin2 Ground Pin3 Ground Pin4 DC+5V U1: (Socket G2), installing the 2nd GEN intel Core i3/i5/i7CPU Socket. 10. CPU_FAN1/SYS_FAN1: (2.
3 Rotation detection Note: Output power of cooling fan must be limited under 5W. 11. A-DDR3/B-DDR3: (SO-DIMM 204Pin socket), DDRIII memory socket, the socket is located at the top of the board and supports 204Pin 1.5V DDRIII 1066/1333/1600MHz FSB SO-DIMM memory module up to 16GB. 12. VGA1: (CRT 2.0mm Pitch 2X5 Pin Header), Video Graphic Array Port, Provide 2x5Pin cable to VGA Port.
6 BKLT_CTRL Note: Pin6 is backlight control signal, support DC or PWM mode, mode select at BIOS CMOS menu. 14. LVDS1: (1.25mm Pitch 2x20 Connector), For 18/24-bit LVDS output connector, Fully supported by Intel QM67 chipset, the interface features dual channel 18/24-bit output.
17. JP_DVI: (2.0mm Pitch 1x2 Pin Header), Reserved. 18. DVI-I: (DVI-I Connector), Digital Visual Interface-Integrated connector. 19. BT1: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup & shutdown or awaken the system from sleep state. 20. JP1: (2.0mm Pitch 2x3 Pin Header),COM1 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM1 port. JP1 Pin# 21.
(Default) 22. Pin1-3, Pin2-4, Pin13-14 Pin7-9, Pin8-10, RS422 Close: (option) Pin3-5, Pin6-8, Pin9-11, Pin10-12, Pin17-18 RS485 (option) Close: Pin3-5, Pin6-8, Pin9-11, Pin10-12, Pin15-16 Pin19-20 COM1: (Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a direct connection to serial devices.
7 NC 8 NC 9 NC RS485 (option): Pin# 23. Signal Name 1 NC 2 NC 3 485- 4 485+ 5 Ground 6 NC 7 NC 8 NC 9 NC JP2: (2.0mm Pitch 2x3 Pin Header),COM2 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM2 port. JP2 Pin# 24.
25. 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JP2 select Setting (RI/5V/12V) COM5: (2.0mm Pitch 2X5 Pin Header),COM5 Port, standard RS232 ports are provided. They can be used directly via COM cable connection. Signal Pin# Pin# Signal Name Name 26. DCD 1 2 RXD TXD 3 4 DTR Ground 5 6 DSR RTS 7 8 CTS RI 9 10 NC JP3: (2.
28. DCD 1 2 RXD TXD 3 4 DTR Ground 5 6 DSR RTS 7 8 CTS JP3select Setting (RI/5V/12V) 9 10 NC USB_LAN1/USB_LAN2: USB4/USB5/USB12/USB13：(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0 ports, speed up to 480Mb/s. Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A. If the external USB device current exceeds 1.5A, please separate connectors into different Receptacle.
30. AUDIO1: (2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662 codec is used to provide high-quality audio I/O ports. Line Out can be connected to a headphone or amplifier. Line In is used for the connection of external audio source via a Line in cable. MIC is the port for microphone input audio. Signal Name 31.
34. PCIE_16X (option): (4x30 Pin), Riser Card expansion connector. Can expand support one PCIeX16 or two PCIeX8 Signal. ASB-M8671T：PCIE_16X connector in the top. ASB-M8671B：PCIE_16X connector in the Bottom. 35. PCIE1X (option): (4x10 Pin),Riser Card expansion connector.Can expand support two PCIe Signal. ASB-M8671T：PCIE1X connector in the top. ASB-M8671B：PCIE1X connector in the Bottom. 36.
Function Signal Name Pin# Pin# Signal Name 485+ / 422TX+ 2 1 422RX+ 485- / 422TX- 4 3 422RX- 3P3V_S0 6 5 Ground WAN_LED 8 7 NC 5V_S5 10 9 5V_S5 RXD4 12 11 DCD4- DTR4- 14 13 TXD4 DSR4- 16 15 Ground CTS4- 18 17 RTS4- 5V_S5 20 19 RI4- 5V_USB_101 22 21 5V_S5 USB10_N 24 23 USB9_N USB10_P 26 25 USB9_P Ground 28 27 Ground Ground 30 29 Ground Power LED 3P3V_S0 32 31 5V_USB_1011 PWR_LED- 34 33 USB11_N Power Button MIO_PSON 36 35 USB11_P Gr
GPIO_OUT PCH_GPIO71 4 PS2_Mous e USB3 USB1 18 17 PCH_GPIO75 5V_S5_USB 20 19 Ground PS2_MSDAT A 22 21 PS2_KBDATA PS2_MSCLK 24 23 PS2_KBCLK 5V_S5_USB 26 25 5V_S5_USB USB3_N 28 27 USB2_N USB3_P 30 29 USB2_P Ground 32 31 Ground 5V_S5_USB 34 33 5V_S5_USB USB1_N 36 35 USB0_N USB1_P 38 37 USB0_P Ground 40 39 Ground GPIO_IN4 PS2_K/B USB2 USB0 Pin1- Ground: HDD LED, They are used to connect hard disk activity LED.
to PS/2 keyboard and mouse via a dedicated cable for direct used. Pin25~40: USB0/USB1/USB2/USB3, Front USB connector, it provides 4 USB ports via a dedicated USB cable, speed up to 480Mb/s. Note: When connecting LEDs and buzzer and GPIO and USB, pay special attention to the signal polarity. Make sure that the connector pins have a one-to-one correspondence with chassis wiring, or it may cause boot up failure. 41. SATA_P1/SATA_P3: (2.
1 +DC5V （NC） 2 Ground （NC） 3 Ground （NC） 4 +DC12V （NC） Note: Output current of the connector must not be above 1A. 43. SATA1/SATA2/SATA3/SATA4: (SATA 7P), SATA Connectors, Four SATA connectors are provided,SATA3 and SATA4 transfer speed up to 3.0Gb/s, SATA1 and SATA2 transfer speed up to 6.0Gb/s, RAID controller supporting RAID 0/1/5/10. 44. Position Function Color SATA1 SATA3.0 white SATA2 SATA3.0 white SATA3 SATA2.0 black SATA4 SATA2.
46. M_SATA1(option): (50.95mmx30mm Socket 52Pin), mSATA socket, it is located at the top, it supports mini PCI-e devices with LPC bus, B2 mSATA bus for flash disk signal. 47. H3/H4 (option): M_SATA1 SCREW HOLES. H3 and H4 for mini MSATA card (50.95mmx30mm Socket 52 Pin) assemble. 48. HS1/HS2/HS3/HS4(CPU SCREW HOLES): CPU FAN SCREW HOLES, Four screw holes for fixed CPU Cooler assemble. 49. H5/H6: U4 SCREW HOLES. 50. TB-522: ASB-M8671 I/O Card, via a dedicated cable connected to ASB-M8671 MIO1.
S1: PWR BT: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup & shutdown or awaken the system from sleep state. PWR LED: POWER LED status. COM3: (Type DB9),I/O serial port, it provides selectable RS422/RS485 serial signal output.
Pin# Signal Name 1 DCD# (Data Carrier Detect) 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 RI (Ring Indicator) USB10,USB11: (Double stack USB type A), I/O USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s. Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A. If the external USB device current exceeds 1.
Signal Name 51.
TB-523 Bottom： LED2: CF Card LED status. S1: PWR BT: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup & shutdown or awaken the system from sleep state. PWR LED: POWER LED status. COM3: (Type DB9),I/O serial port, it provides selectable RS422/RS485 serial signal output.
Note: Use COM3 RS422 or RS485 Function, please enter BIOS CMOS Setup. Path: BIOS Setup Utility \ Advanced /Super IO Configuration \ Serial Port3 Type: [RS-485] [RS-422] JP4: (2.0mm Pitch 2x10 Pin Header) COM4 function setting jumper. Function JP4 Pin# RS232 Close: 3-5,4-6,10-12,11-13 (Default) RS422 Close: 1-3,2-4,5-7,8-10,9-11,12-14,18-20 (option) RS485 Close: 5-7,8-10,9-11,12-14,16-18 (option) COM4: (Type DB9), I/O serial port, it provides selectable RS232/RS422/RS485 serial signal output.
422_RX+ 1 1 NC 422_RX- 2 2 NC 422_TX- 3 3 485- 422_TX+ 4 4 485+ Ground 5 5 Ground NC 6 6 NC NC 7 7 NC NC 8 8 NC NC 9 9 NC USB10: (Single stack USB type A), I/O USB connector, it provides one USB2.0 port, speed up to 480Mb/s. USB11: (2.0mm Pitch 1x4 box Pin Header), I/O USB connector, it provides one USB2.0 port, speed up to 480Mb/s. Pin# Signal Name 1 5V_USB1011 2 USB11_N 3 USB11_P 4 Ground USB10 and USB11 current limited value is 1.5A.
GPIO: (3.5mm Pitch 2x5 Pin Connector),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use. Function +5V Pin# Function 1 2 Ground GPIO_IN1 3 4 GPIO_IN2 GPIO_IN3 5 6 GPIO_IN4 GPIO_OUT1 7 8 GPIO_OUT2 GPIO_OUT3 9 10 GPIO_OUT4 MIO1: (DF13-40P) TB-523 MIO1 via a dedicated Y cable connected to ASB-M801 MIO1 and MIO2.
52. GPIO_OUT1 29 30 GPIO_OUT2 5V_USB1011 31 32 SO_POWER_SENS E USB10_N 33 34 PWR_LED- USB10_P 35 36 PS_ON- Ground 37 38 Ground GPIO_OUT3 39 40 GPIO_OUT4 TB-525E11: TB-525E11 connect to ASB-M8671T PCIE1X connector, PCIE1X is located at the top,It provides one PCIE X1 slot.
53. TB-525E12: TB-525E12 connect to ASB-M8671T PCIE1X connector, PCIE1X is located at the top,It provides two PCIE X1 slot. 54. TB-525E161: TB-525E161 connect to ASB-M8671T PCIE_16X connector, PCIE_16X is located at the top,It provides one PCIE X16 slot.
55. TB-525P1: TB-525P1 connect to ASB-M8671T PCIE1X connector, PCIE1X is located at the top,It provides one PCI slot. 56. TB-525P1E161: TB-525P1E161 connect to ASB-M8671T PCIE_16X and PCIE1X connector, PCIE_16X and PCIE1X is located at the top,It provides one PCIE X16 and one PCI slot.
57. TB-526E11: TB-526E11 connect to ASB-M8671B PCIE1X connector, PCIE1X is located at the Bottom, It provides one PCIE X1 slot. 58. TB-526E12: TB-526E12 connect to ASB-M8671B PCIE1X connector, PCIE1X is located at the Bottom, It provides two PCIE X1 slot.
59. TB-526E161: TB-526E161 connect to ASB-M8671B PCIE_16X connector, PCIE_16X is located at the Bottom,It provides one PCIE X16 slot. 60. TB-526P1: TB-526P1 connect to ASB-M8671B PCIE1X connector, PCIE1X is located at the Bottom, It provides one PCI slot.
61. TB-526P1E161: TB-526P1E161 connect to ASB-M8671B PCIE_16X and PCIE1X connector, PCIE_16X and PCIE1X is located at the bottom,It provides one PCIE X16 and one PCI slot. 62. TB-526P2E161: TB-526P2E161 connect to ASB-M8671B PCIE_16X and PCIE1X connector, PCIE_16X and PCIE1X is located at the bottom,It provides one PCIE X16 and two PCI slot.
63. TB-526P1E82: TB-526P1E82 connect to ASB-M8671B PCIE_16X and PCIE1X connector, PCIE_16X and PCIE1X is located at the bottom,It provides two PCIE X8 and one PCI slot.
Chapter 3 BIOS Setup BIOS Setup Description 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation,.Press [Delete] key to enter CMOS Setup. Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc. ( M8671V15 ) Press 〈DEL〉or〈F2〉to enter setup CMOS Checksum fail。Press ＜DEL＞ to enter setup。 A3 After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows and includes basic information on BIOS, CPU, memory, and storage devices.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset BIOS Information BIOS Vendor Core Version Compliancy Project Version Build Date and Time System Language Boot Security Save & Exit Choose the system American Megatrends 4.6.4.0 UEFI 2.1 M8671V15 X64 09/21/2012 01:44:36 [English] Default language →←: Select Screen System Date [Tue 08/21/2012] ↑↓ System Time [00:00:08] Enter: : Select Item Select +/- : Charge Opt.
→←: Select Screen System Date System Time ↑↓ [Tue 07/10/2012] [00:00:08] : Select Item Enter: Select +/- : Charge Opt. Access Level Administrator F1 : General Help F2: Previous Values F3:Optimized Defaults F4:Save and Exit ESC Exit Version 2.10.1208. Copyright (C) 2010 American Megatrends , Inc. System Time: Set the system time, the time format is: Hour : Minute : 0 to 23 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Day: Month: Date: Year: 3.
►USB Configuration ►W83627UHG Super IO Configuration ► HW Monitor →←: Select Screen ►Sandybridge PPM Configuration +/- : Charge Opt. ↑↓ : Select Item Enter: Select F1 : General Help F2: Previous Values F3:Optimized Defaults F4:Save and Exit ESC Exit Version 2.10.1208. Copyright (C) 2010 American Megatrends , Inc. 3.4.1 PCI Subsystem Settings PCI Bus Driver Versio V2.03.
[256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] Maximum Read Request: [Auto] [128 Bytes] [256 Bytes] [512 Bytes] [1024 Bytes] [2048 Bytes] [4096 Bytes] PCI Express Link Settings: ASPM Support: [Disabled] [Enabled] WARNING:Ebabling ASPM may cause some PCI-E devices to fail Extended Synch: [Disabled] [Enabled] 3.4.
3.4.3 CPU Configuration Socket 0 CPU Information: Intel(R) Core(TM) i5-2430M CPU @2.
Intel Virtualization Technology [Enabled] [Disabled] 3.4.
Software Preserve 3.4.
[47 C] [63 C] [71 C] Active Trip Point 1 Fan Speed Passive Trip Point [79 C] [87 C] [95 C] [103 C] [111 C] [119 C] 75 [95 C] [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C] [79 C] [87 C] [95 C] [103 C] [111 C] [119 C] Passive TC1 Value Passive TC2 Value Passive TSP Value ME SEBus Thermal Reporting [Disabled] [Enabled] PCH Thermal Device [Disabled] [Enabled] MCH Temp Read [Disabled] [Enabled] PCH Temp Read [Disabled] [Enabled] CPU Energy Read [Disabled] [Enabled] CPU Temp Read [Disabled
[Enabled] 3.4.6 PCH-FW Configuration ME FW Version 7.1.52.1176 ME Firmware Mode Normal Mode ME Firmware Type Full Sku Firmware ME Firmware SKU Unidentified Firmware Update Configuration ME FW Image Re-Flash [Disabled] [Enabled] 3.4.
3.4.8 W83627UHG Super IO Configuration W83627UHG Super IO Configuration Super IO Chip Winbond W83627UHG COM1 Configuration COM2 Configuration COM3 Configuration COM4 Configuration COM5 Configuration COM6 Configuration 3.4.9 3.4.10 HW Monitor PC Health Status System temperature : CPU temperature CPU Fan Speed VCORE : +56 : 7000 RPM : +1.145V +12V +3.3V +1.5V 5VSB VBAT : : : : : +42 C +11.556 V +3.280 V +1.520 V +5.125 V +3.
Long duration power limit Long duration maintained Short duration power limit 0 28 0 TCC active offset 3.5 0 Chipset Settings Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit System Agent (SA) ►System Agent (SA) Configuration ►PCH-IO Configuration Parameters →←: Select Screen ↑↓ : Select Item Enter: Select +/- : Charge Opt. F1 : General Help F2: Previous Values F3:Optimized Defaults F4:Save and Exit ESC Exit Version 2.10.
IGFX Frequency Graphics Turbo IMON Current Primary Display 650 MHz 31 [Auto] [IGFX] [PEG] [PCI] Internal Graphics [Auto] [Disabled] [Enabled] GTT Size [2MB] [1MB] Aperture Size [256MB] [128MB] [512MB] DVMT Pre-allocated [64MB] [0MB] [32MB] [96MB] [128MB] [160MB] [192MB] [224MB] [256MB] [288MB] [320MB] [352MB] [384MB] [416MB] [448MB] [480MB] [512MB] Dvmt Total Gfx Mem [256MB] [128MB] [MAX] GFX Low Power Mode ACS-2695 User Manual 67
[Enabled] [Disabled] LCD Control: Primary IGFX Boot Display [VBIOS Default] [CRT] [DVI] [LVDS] LCD Panel Type [1280 X 1024 24bit 2ch] [640 X 480 18bit 1ch] [800 X 480 18bit 1ch] [800 X 600 18bit 1ch] [800 X 600 24bit 1ch] [1024 X 768 18bit 1ch] [1024 X 768 24bit 1ch] [1280 X 800 18bit 1ch] [1366 X 768 18bit 1ch] [1440 X 900 24bit 2ch] [1600 X 900 24bit 2ch] [1600 X 1200 24bit 2ch] [1680 X 1050 24bit 2ch] [16800 X 1050 24bit 2ch] [1920 X 1080 24bit 2ch] [2048 X 1536 24bit 2ch] Panel Scaling [Auto ] [Off ] [F
[Level 1 ] [Level 2 ] [Level 3 ] [Level 4 ] [Level 5 ] [Level 6 ] [Level 7 ] [Level 9 ] [Level 10 ] [Level 11 ] [Level 12 ] [Level 13] [Level 14 ] [Level 15] [Level 16 ] BIA [Auto ] [Disabled ] [Level 1 ] [Level 2 ] [Level 3 ] [Level 4 ] [Level 5 ] Spread Spectrum clock chip [Off ] [Hardware ] [Software ] ALS Support [Disabled] [Enabled] Panel Color Depth [18 Bit] [24 Bit] ►DMI Configuration ►NB PCIe Configuration PEG0 PEG0 – Gen X ACS-2695 User Manual [Not Present] [Auto] 69
[Gen1] [Gen2] PEG1 PEG1 – Gen X [Not Present] [Auto] [Gen1] [Gen2] PEG2 PEG2 – Gen X [Not Present] [Auto] [Gen1] [Gen2] PEG3 [Not Present] PEG3 – Gen X [Auto] [Gen1] [Gen2] Always Enable PEG [Enabled] [Disabled] PEG ASPM [Disabled] [Auto] [ASPM LOs] [ASPM L1] [ASPM LOsL1] ASPM LOs [Root Port Only] [Endpoint Port Only] [Both Root and Endpoint Ports] De-emphasis Control [-3.5 dB] [-6 dB] ►Memory Configuration Memory RC Version Memory Frequency ACS-2695 User Manual 1.2.2.
Total Memory DIMM#0 DIMM#1 2048 MB (DDR3) 2048 MB (DDR3) Not Present DIMM#2 DIMM#3 CAS Latency (tCL) Minimum delay time CAS to RAS (tRPmin) Row Precharge (tRPmin) Active to Precharge (tRPmin) DIMM profile Not Present Not Present 7 7 7 20 [Default DIMM profile] [XMP profile 1] [XMP profile 2] Memory Frofile [Auto] [1067] [1333] [1600] [1867] [2133] Max TOLUD [Dynamic] [1GB] [1.25GB] [1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB] [2.75GB] [3GB] [3.
RMT Crosser Support Memory Scrambler [Disabled] [Enabled] MRC Fast Boot [Enabled] [Disabled] Force Cold Reset [Enabled] [Disabled] Scrambler Seed Generation off [Disabled] [Enabled] Memory Remap [Disabled] [Enabled] Channel A DIMM Control [Enabled Both DIMMS] [Disabled DIMM0] [Disabled DIMM1] [Disabled Both DIMMS] ►GT-Power Management Control GT Info RC6 (Render Standby) GT2 (0X116) [Enabled] [Disabled] GT overClocking Support [Disabled] [Enabled] ►PCH-IO Configuration Intel PCH RC Version Intel PCH SKU N
EC Turbo Control Mode [Disabled] [Enabled] Azalia [Auto] [Disabled] [Enabled] Azalia Internal Codec [Enabled] [Disabled] BIOS Security Configuration High Precision Event Timer Configuration High Precision Timer [Enabled] [Disabled] SLP_S4 Assertion Width [4-5 Seconds] [1-2 Seconds] [2-3 Seconds] [3-4 Seconds] Restore AC Power Loss [Last State] [Power off] [Power on] Set NAND Management Override [Enabled] [Disabled] ►USB Configuration EHCI1 [Enabled] [Disabled] EHCI2 [Enabled] [Disabled] USB Ports Per-Port D
[Enabled] [Disabled] DMI Link ASPM Control [LOSL1] [LOS] [Disabled] DMI Link Extended Synch Control [Disabled] [Enabled] Subtractive Decode [Disabled] [Enabled] ►PCI Express Root Port 1 ►PCI Express Root Port 2 ►PCI Express Root Port 3 ►PCI Express Root Port 4 ►PCI Express Root Port 5 ►PCI Express Root Port 6 ►PCI Express Root Port 7 ►PCI Express Root Port 8 ACS-2695 User Manual 74
3.6 Boot Settings Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Boot Configuration Setup Prompt Timeout Bootup Numlock State Security Save & Exit Number of seconds to 1 [On] Wait for setup Activation key. 65535(0xFFFF)means Fast Boot [Enabled] CSM16 Module Version Indef inite waiting. 07.
Option ROM Messages [Force BIOS] [Keep Current] Interrupt 19 Capture [Disabled] [Enabled] Boot Override SATA PM: ST9320423AS …… Launch EFI Shell from filesystem device 3.7 Security Settings Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Password Description Save & Exit Set Administrator Password If ONLY the Administrator’s password is set, Then this only limits access to Setup and is Only asked for when entering Setup.
3.7.2 User Password Type the password with up to 20 characters and then press Enter key. This will clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press Enter key. You may press Esc key to abandon password entry operation. To clear the password, just press Enter key when password input window pops up. A confirmation message will be shown on the screen as to whether the password will be disabled.
→←: Select Screen Restore Defaults Save user Defaults Restore user Defaults ↑↓ : Select Item Enter: Select +/- : Charge Opt. Boot Override SATA PM:*** … Launch EFI Shell from filesystem device F1 : General Help F2: Previous Values F3:Optimized Defaults F4:Save and Exit ESC Exit Version 2.10.1208. Copyright (C) 2010 American Megatrends , Inc.
[Yes] [No] Restore user Defaults Restore User Defaults Restore User Defaults? [Yes] [No] Launch EFI Shell from filesystem device WARNING Not Found [ok] -------------------------------------------------------------------------------------------------------------------- ACS-2695 User Manual 79
Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows XP. The software and drivers are included with the motherboard. The contents include Intel chipset driver, VGA driver, LAN driver, Audio driver, .NET framework 3.5 driver Installation instructions are given below.
4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1: Select Chipset from the list Follow the step-by-step installation process to install the driver.
ACS-2695 User Manual 82
ACS-2695 User Manual 83
Click Finish, when the installation process is complete, the Setup Complete screen appears. See as picture. 4.2 Intel VGA Chipset Driver To install the VGA drivers, follow the steps below to proceed with the installation. 1. Click Intel VGA Chipset Driver.
Follow the step-by-step installation process to install the Graphics Media Accelerator driver.
ACS-2695 User Manual 86
ACS-2695 User Manual 87
ACS-2695 User Manual 88
Click FINISH; A Driver Installation Complete.
4.3 Intel 82574L Network adapter Driver To install the Intel 82574L Network adapter Driver, please follow the steps below. Select LAN from the list Follow the step-by-step installation process to install the LAN driver.
ACS-2695 User Manual 91
ACS-2695 User Manual 92
Click FINISH; A Driver Installation Complete. 4.4 Realtek HD Audio Driver Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below.
Follow the step-by-step installation process to install the Realtek HD Audio driver.
Click FINISH; A Driver Installation Complete. 4.5 Microsoft .NET Framework 3.5 Service Installation To install the Microsoft .NET Framework 3.5 Service, please follow the steps below.
ACS-2695 User Manual 96
ACS-2695 User Manual 97
