ADP-1121 Display Monitor User Manual Release Date Revision November 2005 May 2007 V0.1 V0.2 ®2005 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.
Warning!___________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 Getting Started 1.1 Features………………………………………………………….…..…..…4 1.2 Specifications…………………………………………. ...……………...….4 1.3 Dimensions…………………………………...………………………….…7 1.4 Brief Description...................................................................................8 Chapter 2 OSD 2.1 Front Panel Controls………….………………………………….…..……9 2.
Chapter 1_____________________________ 1.1 Features Display: 12.1” TFT SVGA LCD Luminance: 300 cd/m² Front Panel Compliance: NEMA 4/IP 65 rating Mounting Type: Wall-mount screw holes Touch Screen: Resistive (optional) I/O Port: VGA, DVI (optional), Composite Video and S-Video (optional) Resolutions: Wide-ranging resolutions from 640x480 to up to 1600x1200 with auto phase and auto position 1.2 Specifications Display TFT LCD: 12.
Resolution: 800 x 600 Maximum Colors: 262K colors Backlight Lifetime: 2 CCFL tubes (50,000 hours) Touch Screen: Resistive and antiglare OSD Controls/Indicators: Automatic screen, setup (OSD), brightness, contrast, horizontal/vertical position, image lock, color balance, video information, power on and sync detected OS Compatibility: Win 95/98, XP, 2000, NT 4.
Mechanical Construction: Steel chassis, plastic front bezel External Power Input: 12V AC or 12~24V AC (optional) Power Supply: 90V~240V, 50~60Hz, 1.5A (max.) Dimensions 317(W) x 52.8(D) x 243(H) mm Weight: 2.62kg Mounting Type: Panel/VESA 75 Ordering Information ADP-1121 Option 12.
1.3 Dimensions Figure 1.
1.4 Brief Description of the ADP-1121 The ADP-1121 display monitor is compact and thus, it is ideal for monitoring and control applications. It comes with an optional touch screen, making operation more convenient and faster. The front panel of the display monitor is sealed with gasket for the NEMA 4/IP 65 compliance when it is panel-mounted in a NEMA rated cabinet or enclosure. Figure 1.2: Front View of ADP-1121 Figure 1.
Chapter 2_____________________________ 2.1 Front Panel Controls Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item. Auto Button: One-touch auto adjustment 2.2 OSD Controls To make any adjustment, select the following: 1. Press (Menu) to show the OSD menu or disable the OSD menu. 2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu. 3.
2.
In the Position, there are the following: z H. Position z V. Position z Back In the OSD menu, there are: z z z z OSD H. Pos. OSD V. Pos.
2.4 AD Board (TB-6020) OSD Functions 1.) Getting into Burn-in Mode Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go) the buttons until the AC power cord is connected and the “RGB” appears on the top left corner of your screen. Now it can be put into the burn-in mode for changing colors. 2.) Getting Out of Burn-in Mode Before getting out of the burn-in mode, please first disconnect the AC power cord.
Appendix_____________________________ Panel Mounting The ADP-1121 display monitor is designed to be panel-mounted as shown in Figure A. Just carefully place the unit through the hole and tighten the given 8 screws from the rear to secure the mounting. Figure A: Panelmounting of the ADP1121 Rack Mounting (optional) The ADP-1121 display monitor can be rack-mounted as an option. Just carefully slide it into the rack and tighten the given 8 screws from the front to secure the mounting as shown in Figure B.
VESA 75 (optional) The ADP-1121 display monitor can be VESA 75-mounted as an option. Just accurately put a monitoring arm right behind the unit where the four holes are and tighten the four given screws as shown in Figure C.