ADP-1156 Display Monitor User Manual Release Date Revision June 2007 ®2005 Aplex Technology, Inc. V1.0 All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.
Warning!___________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual. It may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 Getting Started 1.1 Features………………………………………………………….…..…..…4 1.2 Specifications…………………………………………. ...……………...….4 1.3 Dimensions…………………………………...………………………….…6 1.4 Brief Description...................................................................................7 1.5 Display Mode……………………………………………………………….8 Chapter 2 2.1 2.2 2.3 2.4 OSD Front Panel Controls………….
Chapter 1_____________________________ 1.1 Features ● ● ● ● ● ● 15” TFT XGA LCD with luminance of 400 cd/m² Five edges panel NEMA 4/IP 65 rated Resistive touch screen (optional) VESA mount VGA Input, with optional DVI, Video or S-Video input Supports wide-ranging resolutions from 640x480 to up to 1600x1200 with auto phase and auto position 1.2 Specifications Display ● ● ● ● ● Display: 15” color active TFT flat panel display Maximum resolution: 1024 x 768 (native mode) Maximum colors: 16.
Environmental ● ● ● ● ● ● Operating temperature: 0 to 50℃ (32 to 122℉) Storage temperature: -20 to 60℃ (-4 to 140℉) Relative humidity: 10 to 95% @40℃, non-condensing, without touch screen Vibration: 1G peak, 5~500Hz (at random) Shock: 15G peak acceleration (11 msec.
1.3 Dimensions Figure 1.
1.4 Brief Description of the ADP-1156 The ADP-1156 features an excellent viewing ability for monitoring and control applications. It is available with resistive touch screen that is easy to use and maintain. The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is panel-mounted in a NEMA rated cabinet or enclosure. Figure 1.2: Front View of the ADP-1156 Figure 1.
1.5 Display Mode Display Mode VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 1152 x 864 SXGA 1280 x 1024 ADP-1156 User Manual Hori. Sync (KHz) Vert. Sync.
Chapter 2_____________________________ 2.1 On Screen Display Controls Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item. Auto Button: One-touch auto adjustment 2.2 OSD Controls To make any adjustment, select the following: 1. Press (Menu) to show the OSD menu or disable the OSD menu. 2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
2.3 Main Menu In the Main menu, there are the following items: z Color z Image Setting z Position z OSD Menu z Language z Misc z Exit For Color, check out the following: z Contrast z Brightness z Color Adjust z Color Temp z Back For Image setting, check out the following: z Clock z Phase z Gamma z Sharpness z Back In the Position, there are the following: z H. Position z V.
In the OSD menu, there are: z z z z OSD H. Pos. OSD V. Pos.
2.4 AD Board (TB-6020) OSD Functions 1.) Getting into Burn-in Mode Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go) the buttons until the AC power cord is connected and the “RGB” appears on the top left corner of your screen. Now it can be put into the burn-in mode for changing colors. 2.) Getting Out of Burn-in Mode Before getting out of the burn-in mode, please first disconnect the AC power cord.