ADP-1120/ADP-1150/ADP-1170/ADP-1190 Display Monitor User Manual Release Date Revision April 2005 May 2007 Aug. 2007 ®2005 Aplex Technology, Inc. V0.1 V0.2 V0.3 All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.
Warning!___________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and Used in accordance with the instructions manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when Operated in a commercial environment.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 Getting Started 1.1 Features………………………………………………………….…..…..…4 1.2 Specifications…………………………………………. ...……………...….4 1.3 Dimensions…………………………………...………………………….…6 1.4 Brief Description...................................................................................10 1.5 Display Mode………………………………………………………………11 Chapter 2 2.1 2.2 2.3 2.4 OSD Front Panel Controls………….
Chapter 1_____________________________ 1.1 Features ADP-1120 ADP-1150 ADP-1170 ADP-1190 Display 12.1” TFT SVGA LCD 15” TFT XGA LCD 17” TFT SXGA LCD 19” TFT SXGA LCD Luminance 300 cd/m² 400 cd/m² 300 cd/m² 250 cd/m² Front panel NEMA 4/IP 65 rating Wall-mount screw holes Resistive touch screen (optional) Optional DVI, Video or S-Video input∘ Supports wide-ranging resolutions from 640x480 to up to 1600 x 1200 with auto phase and auto position. 1.
Environment Operating Temperature: 0~50°C (32°~122°F) Storage Temperature: -20~60°C (-4°~140°F) Relative Humidity: 10~90% @40°C non-condensing, without touch screen Vibration: 1g peak, 5~500Hz (at random) Shock: 15G peak acceleration (11msec.
1.3 Dimensions Figure 1.
Figure 1.
Figure 1.
Figure 1.
1.4 Brief Description of the ADP-1120, ADP-1150, ADP-1170 & 1190 The ADP-1120, the ADP-1150, the ADP-1170 and the ADP-1190 feature an excellent viewing ability for monitoring and control applications. It is available with resistive touch screen that is easy to use and maintain. The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is panel-mounted in a NEMA rated cabinet or enclosure. Figure 1.4: Overall View of ADP-1120 (12.
1.5 Display Mode Display Mode Hori. Sync (KHz) Vert. Sync.
Chapter 2_____________________________ 2.1 Front Panel Controls Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item. Auto Button: One-touch auto adjustment 2.2 OSD Controls To make any adjustment, select the following: 1. Press (Menu) to show the OSD menu or disable the OSD menu. 2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu. 3.
2.
In the Position, there are the following: z H. Position z V. Position z Back In the OSD menu, there are: z z z z OSD H. Pos. OSD V. Pos.
2.4 AD Board (TB-6020) OSD Functions 1.) Getting into Burn-in Mode Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go) the buttons until the AC power cord is connected and the “RGB” appears on the top left corner of your screen. Now it can be put into the burn-in mode for changing colors. 2.) Getting Out of Burn-in Mode Before getting out of the burn-in mode, please first disconnect the AC power cord.
Appendix_____________________________ Panel Mounting The ADP-1120/1150/1170/1190 display monitor is designed to be panel-mounted as shown in Figure A. Just carefully place the unit through the hole and tighten the given 8 screws from the rear to secure the mounting. Figure A: Panelmounting of the ADP1120/1150/1170/1190 Rack Mounting (optional) The ADP-1120/1150/1170/1190 display monitor can be rack-mounted as an option.
