ARCHMI-7XX (SBC-7106A) User Manual Release Date _ Revision Sep. 2014 ® 2014 Aplex Technology, Inc. V1.0 All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw ARCHMI-7XX User Manual URL: www.aplex.com.
Warning!_____________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Packing List Accessories (as ticked) included in this package are: □ Adaptor □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on. Always disconnect power when the system is not in use. ◆ Disconnect power when you change any hardware devices.
Table of Contents______________________ Warning!/Avertissement!............................…………………………….……..….2 Caution/Precaution/Disclaimer……………………………………………………2 Packing List…………………………………………………………………………..3 Safety Precautions/Consignes de sécurité ……….……………………………..3 Chapter 1 1.1 1.2 1.3 1.4 Getting Started Specifications…………………………………...…………………………..6 Dimensions……………………………………………………………….…9 Brief Description of ARCHMI-7XX………………………………….……11 Installation of HDD (ARCHMI-717/ARCHMI-721)…………………..
Chapter 5 Touch Screen Installation 5.1 Windows 2000/XP USB Driver Installation for PenMount 6000 Series.... ……………………………………………………………………………...77 5.1.1 Installing Software (Resistive Touch)……………………………….....77 5.1.2 Installing Software (Projected Capacitive)……………………………81 5.2 Software Functions………………………………………………………..87 5.2.1 Software Functions (Resistive Touch)…………………………………87 5.2.2 Software Functions (Projected Capacitive)…………………………...97 Figures Figure 1.1: Dimensions of ARCHMI-717……..…………………………........
Chapter 1 Getting Started 1.1 Specifications ARCHMI-717(P) ARCHMI-721(P) System CPU Onboard Intel Atom Cedar View D2550 1.86GHz Dual Core Processors Chipset Intel NM10 Express Chipset Memory Onboard 4GB DDR III 800 MHz IO Port USB Serial/Parallel 2 x USB 2.
Contrast Ratio 800:1 3000:1 View angle(H°/V°) 160 / 140 178 / 178 Touch Screen – Resistive Touch Window Type TS Control IC PenMount 6000 on Board Interface RS-232 interface Light Transmission(%) Over 80% Touch Screen – Projected Capacitive Type TS Control IC Chip on tail Interface USB interface Light Transmission(%) Over 90% Power Power Input 9~36V/DC Mechanical Construction RAL 9007 IP Rating IP65 compliant front panel Mounting Panel Mounting VESA 100 x 100 mm Dimension (mm) 439
3. 4.
1.2 Dimensions Figure 1.
Figure 1.
1.3 Brief Description of ARCHMI-7XX ARCHMI-717 and ARCHMI-721 are Industrial Compact Size Panel PC in ARCHMI series, which comes with flat front panel touch screen and fanless design. It is powered by Intel Atom D2550 1.8GHz CPU built-in, 4GB DDR III 800 MHz. ARCHMI series is 9~36VDC wide-ranging power input and IP65 compliant front panel. Optional projected capacitive touch screen support 7H anti-scratch surface is ideal for use as a PC-based controller for Industrial Automation & Factory Automation.
Figure 1.5: Rear View of ARCHMI-721 Figure 1.
1.4 Installation of HDD (ARCHMI-717/ARCHMI-721) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 You can put or remove HDD into the machine by pulling the HDD bracket. Step 3 You can remove HDD by unscrewing 4 screws in the HDD bracket. Note: 4 screws are packed in the packing package.
Step 4 There is a SD hole in the side of machine. You can replace SD card from there.
Chapter 2 Hardware 2.1 Mainboard Introduction SBC-7106A is a 4" industrial motherboard developed on the basis of Intel Cedarview-M/D Processors and NM10, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE configuration,one VGA port, one HDMI port, one LVDS interface. To satisfy the special needs of high-end customers, CN1 and CN2 and CN3 richer extension functions.
1 x SD Socket (USB to SD) Ethernet 2 x PCIe Gbe LAN by Intel 82574L 2 x USB 2.0 (type A)stack ports (USB4/USB5) USB Serial 2 x USB 2.0 Pin header for CN3 (USB2/USB3) 1 x USB 2.0 Pin header for CN1 (USB0,option) 1 x USB 2.0 Pin header for CN2 (USB1) 1 x USB 2.
2 x RJ45 GbE LAN Ports 1 x HDMI Port 1 x Stack audio Jack (Line out) Watchdog Timer Software programmable 1 – 255 second by Super I/O Temperature Operating: -20℃ to 70℃ Storage: -40℃ to 85℃ Humidity 5% - 95%, non-condensing, operating Power Consumption 12V /0.95A (Intel Atom N2600 processor with 2GB DDR3 DRAM) EMI/EMS Meet CE/FCC class A 2 x CAN bus TB-528CAN2 1 x SIM Card Socket 1 x mini-PCI-express slot (units :mm) Figure 2.
2.3 Jumpers and Connectors Location Figure 2.2: Jumpers and Connectors Location- Board Top Figure 2.
2.4 Jumpers Setting and Connectors 1. CPU1: (FCBGA559), onboard Intel Intel Cedarview-M/D Processors Model CPU SBC-7106A-D25-4G SBC-7106A-D25P-4G D2550 D2550（option） SBC-7106A-N26-2G N2600（option） 2. H3/H4/H5/H6: CPU1 and U53 Heat Sink Screw holes, four screw holes for intel D2550 (or N2600) and NM10 Heat Sink assemble. 3. U5/U6/U7/U8/U9/U10/U11/U12: Onboard DDRIII Memory 4. 5. Model Memory SBC-7106A-D25-4G SBC-7106A-D25P-4G 4GB 4GB（option） SBC-7106A-N26-2G 2GB（option） JP5: (2.
Procedures of CMOS clear: a) Turn off the system and unplug the power cord from the power outlet. b) To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for about 3 seconds then reinstall the jumper clip back to pins open. c) Power on the system again. d) When entering the POST screen, press the or key to enter CMOS Setup Utility to load optimal defaults. e) After the above operations, save changes and exit BIOS Setup. 6. 7. 8.
9. CPU_FAN1: (2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup. Pin# Signal Name 1 Ground 2 VCC 3 Rotation detection Note: Output power of cooling fan must be limited under 5W. 10. Model CPU_FAN1 SBC-7106A-D25 Yes SBC-7106A-D25P Yes SBC-7106A-N26 No VGA1: (CRT 2.0mm Pitch 2X6 Pin Header), Video Graphic Array Port, Provide 2x6Pin cable to VGA Port.
11. HDMI1: (HDMI 19P Connector), High Definition Multimedia Interface connector. 12. JP6: (2.0mm Pitch 2x2 Pin Header), LVDS jumper setting. JP6 Pin1-Pin2（Close） Function (CN1) Single channel LVDS Pin1-Pin2（Open） Dual channel LVDS (Default) 13. Pin3-Pin4（Close） 8/24 bit (Default) Pin3-Pin4（Open） 6/18 bit U66: AT24C02-DIP8,The EEPROM IC（U66）is the set of LVDS resolution. If you need other resolution settings, please update U66 data.
3 Ground 4 Ground 5 BKLT_EN_OUT 6 BKLT_CTRL Note: Pin6 is backlight control signal, support DC or PWM mode, mode select at BIOS CMOS menu. 15. CN1: (1.25mm Pitch 2x20 Connector, DF13A-40DP-1.25V), For 18/24-bit LVDS2 output connector, Fully supported by Parad PS8625(DP to LVDS), the interface features dual channel 24-bit output. Low Voltage Differential Signaling, A high speed, low power data transmission standard used for display connections to LCD panels.
JP1 Pin# 17. Function Close 1-2 COM1 RI (Ring Indicator) (default) Close 3-4 COM1 Pin9:DC+5V (option) Close 5-6 COM1 Pin9:DC+12V (option) S_232: (Switch),COM1 jumper setting, it provides selectable RS232 or RS422 or RS485 serial signal output. Function RS232 (Default) 18.
RS232 (Default): Pin# Signal Name 1 DCD# (Data Carrier Detect) 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JP1 select Setting (RI/5V/12V) BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-232】 RS422 (option): Pin# Signal Name 1 422_RX+ 2 422_RX- 3 422_TX- 4 422_TX+ 5 Ground 6 NC 7 NC 8 NC 9 NC BIOS Setup： Advanced/W83627UHG Super
9 NC BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-485】 20. JP2: (2.0mm Pitch 2x3 Pin Header),COM2 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM2 port. JP2 Pin# Close 1-2 21. Function Close 3-4 COM2 RI (Ring Indicator) (default) COM2 Pin9：DC+5V (option) Close 5-6 COM2 Pin9：DC+12V (option) COM2: (Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a direct connection to serial devices. Pin# 22.
23. TCH1: (2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector. Pin# 24. Signal Name 1 SENSE 2 X+ 3 X- 4 Y+ 5 Y- 6 GND_EARCH LED1, LED2, LED3 (option): LED1: LED STATUS. Green LED for Motherboard Power status. LED2: LED STATUS. Green LED for Motherboard Standby Power Good status. LED3: LED STATUS. Green LED for Touch Power status. 25. SATA_P: (2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector are reserved to provide power for SATA devices.
with USB2.0 and LPC and SMBUS and PCIe signal. MPCIe card size is 30x30mm. 30. H1/H2: MPCIE1 SCREW HOLES, H1and H2 for mini PCIE card (30mmx30mm) assemble. 31. AUDIO: (2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662 codec is used to provide high-quality audio I/O ports. Line Out can be connected to a headphone or amplifier. Line In is used for the connection of external audio source via a Line in cable. MIC is the port for microphone input audio.
34. LAN1/LAN2: LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green) and ACTIVE LED (yellow) respectively located at the left-hand and right-hand side of the Ethernet port indicate the activity and transmission state of LAN. 35. BUZ1: Onboard buzzer. 36. CN2: (DF13-30P Connector),For expand output connector, It provides eight GPIO,one RS422 or RS485,one USB2.0,one Power on/off, one Reset.
two USB 2.0,one PS/2 mouse，one PS/2 keyboard, two uart,one PCIe x1,one SMbus. connected to the TB-528 riser Card.
CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with USB2.0(USB2),Smbus,SIM and PCIe signal. MPCIe card size is 30x30mm or 30x50.95mm. Signal Name Function support PCIe 1X Yes USB2.0 (USB2) Yes SMBus Yes SIM Yes H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status.
Pin# Signal Name 1 KBDATA 2 MSDATA 3 Ground 4 +5V 5 KBCLK 6 MSCLK GPIO1： (2.0mm Pitch 2x5 Pin Header),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use. Signal Name Pin# Pin# Signal Name Ground 1 2 NC NC 3 4 SMB_DATA_R SMB_CLK_R 5 6 ICH_GPIO13_IN1 ICH_GPIO24_IN2 7 8 ICH_GPIO26_IN3 ICH_GPIO27_IN4 9 10 +5V USB_23： (2.
Close 3-4 COM5 Pin9=+5V (option) Close 5-6 COM5 Pin9=+12V (option) COM5： (Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,select output Signal RI or 5V or 12v, For details, please refer to description of JP3.
Pin# Signal Name 1 DCD# (Data Carrier Detect) 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JP6 Setting: Pin1-2 : RI (Ring Indicator) Pin3-4 : 5V Standby power Pin5-6:12V Standby power (default) (option) (option) COM_6（option）： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. 39.
CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. LED1： Mini PCIe devices LED Status. PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used. Pin# Signal Name 1 KBDATA 2 MSDATA 3 Ground 4 +5V 5 KBCLK 6 MSCLK GPIO1： (2.0mm Pitch 2x5 Pin Header),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use.
ICH_GPIO24_IN2 7 8 ICH_GPIO26_IN3 ICH_GPIO27_IN4 9 10 +5V USB_23： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s. Signal Name Pin# Pin# Signal Name 5V_USB23 1 2 5V_USB23 USB3_N 3 4 USB2_N USB3_P 5 6 USB2_P Ground 7 8 Ground NC 9 10 Ground Note: Before connection, make sure that pinout of the USB Cable is in accordance with that of the said tables.
4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JP5 Setting: Pin1-2 : RI (Ring Indicator) Pin3-4 : 5V Standby power Pin5-6:12V Standby power (default) (option) (option) JP6： (2.0mm Pitch 2x3 Pin Header),COM6 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM6 port.
COM_6（option）： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. 40. Signal Name Pin# Pin# Signal Name DCD 1 2 RXD TXD 3 4 DTR Ground 5 6 DSR RTS 7 8 CTS JP6 Setting: RI/5V/12V 9 10 NC TB-528C1U2P1/TB-528C1U2 (option): SBC-7106A Riser Card,TB-528C1U2P1 CN3 connect to SBC-7106A CN3 pin Header. TB-528C1U2P1 Top： CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header.
H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status. SIM1（option）： (SIM Socket 6 Pin), Support SIM Card devices. PS_ON1： (2.0mm Pitch 1X2 Pin Wafer), ATX Power and Auto Power on jumper setting. PS_ON Close 1-2 Open 1-2 Mode Auto Power on (Default) ATX Power PS_ON2（option）： (2.0mm Pitch 1X2 Pin Wafer),They can be used directly via cable connection to SBC-7106A JP5.
Signal Name Pin# Pin# Signal Name Ground 1 2 NC NC 3 4 SMB_DATA_R SMB_CLK_R 5 6 ICH_GPIO13_IN1 ICH_GPIO24_IN2 7 8 ICH_GPIO26_IN3 ICH_GPIO27_IN4 9 10 +5V USB23： (Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s. USB_23（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s.
COM5： (Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to serial devices. COM5 port is controlled by pins No.1~6 of JP5,select output Signal RI or 5V or 12v, For details, please refer to description of JP3.
Pin# 1 Signal Name DCD# (Data Carrier Detect) 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JP6 Setting: Pin1-2 : RI (Ring Indicator) Pin3-4 : 5V Standby power Pin5-6:12V Standby power (default) (option) (option) S1： PWR BT: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition.
CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with Smbus,USB2.0,SIM and PCIe signal. MPCIe card size is 30x30mm or 30x50.95mm. Signal Name Function support PCIe 1X Yes USB2.0 (USB2) Yes SMBus Yes SIM Yes H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status.
PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used. Pin# Signal Name 1 KBDATA 2 MSDATA 3 Ground 4 +5V 5 KBCLK 6 MSCLK USB_IN（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides two USB port via a dedicated USB cable, speed up to 480Mb/s.
JP3 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option) COM6： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. Signal Name Pin# Pin# Signal Name DCD 1 2 RXD TXD 3 4 DTR Ground 5 6 DSR RTS JP6 Setting：RI/5V/12V 7 8 CTS 9 10 NC COM5: (2.0mm Pitch 2X5 Pin Header),COM5 Port, up to one standard RS232 port are provided.
JP1： (2.0mm Pitch 1x2 Pin Header), Reserve. JP2： (2.0mm Pitch 1x2 Pin Header), Reserve. CAN1/CAN2： (3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface.
CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106A CN3 pin Header. USB23： (Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s.
Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation,.Press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows and includes basic information on BIOS, CPU, memory, and storage devices. 3.2 BIOS Setup Utility Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.
3.
System Time: Set the system time, the time format is: Hour : 0 to 23 Minute : 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Day: Month: Date: Year: Note that the ‘Day’ automatically changes when you set the date. 01 to 12 01 to 31 1998 to 2099 3.4 Advanced Settings 3.4.1 PCI Subsystem Settings PCI Bus Driver Versio V2.05.
[32 PCI Bus Clocks] [64 PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus Clocks] VGA Palette Snoop: [Disabled] [Enabled] PERR# Generation: [Disabled] [Enabled] SERR# Generation: [Disabled] [Enabled] 3.4.
S3 Video Repost: [Disabled] [Enabled] 3.4.3 CPU Configuration Processer Type EMT64 Processor Speed System Bus Speed Ratio Status Actual Ratio System Bus Speed Processor Stepping Intel(R) Atom™ CPU D2550 Supported 1865 MHz 533MHz 14 14 533 MHz 30661 Microcode Revision L1 Cache RAM L2 Cache RAM 269 2x56 k 2x512 k Processor Core Hyper-Threading Dual Supported Hyper-Threading: [Enabled] [Disabled] Execute Disable Bit: [Enabled] [Disabled] Limit CPUID Maximum: [Disabled] [Enabled] 3.4.
Active Trip Point Hi [71C] Passive Trip Point [95] Passive TC1 Value 1 Passive TC2 Value Passive TSP Value 3.4.5 IDE Configuration SATA Port0 SATA Port1 5 10 Not Present Not Present SATA Controller(S): [Enabled] [Disabled] Configure SATA as: [IDE] [AHCI] Misc Configuration for hard disk 3.4.
[Auto] [Manual] 3.4.7 W83627UHG Super IO Configuration W83627UHG Super IO ch W83627UHG Serial Port 1 Configuration UART Mode Selection： [RS-232] [RS-485] [RS-422] Serial Port 2 Configuration Serial Port 3 Configuration UART Mode Selection： [RS-485] [RS-422] Serial Port 4 Configuration Serial Port 5 Configuration Serial Port 6 Configuration 3.4.8 W83627UHG HW Monitor PC Health Status System temperature1 SystemFan Speed CPUFan Speed VCORE +12V +3.3V +1.5V AVCC VCC5V VSB5 VBAT 3.4.9 : +38 : N/A : N/A : +1.
[Disabled] Console Redirection Settings Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] [Enabled] Console Redirection Settings 3.4.
3.5 Chipset Settings 3.5.1 Host Bridge ►Memory Frequency and Timing ►Intel IGD Configuration ******* Memory Information ******* Memory Frequency 1067 MHz(DDR3) Total Memory 4096 MB DIMM#0 Not Present DIMM#1 4096 MB Memory Frequency and Timing MRC Fast Boot [Enabled] [Disabled] Max TOLUD [Dynamic] [1GB] [1.
[1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB] [2.75GB] [3GB] [3.
[Negative] Back light Control Lev [Level 8] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Level 6] [Level 7] [Level 9] [Level 10] [Level 11] [Level 12] [Level 13] [Level 14] [Level 15] 3.5.2 South Bridge TPT Devices PCI Express Root Port 0 PCI Express Root Port 1 PCI Express Root Port 2 PCI Express Root Port 3 DMI Link ASPM Control [Enabled] [Disabled] PCI-Exp.
3.
[Enabled] [Disabled] Skip USB [Disabled] [Enabled] Skip PS2 [Disabled] [Enabled] CSM16 Module Version Gatea20 Active 07.
[Do not Launch] [UEFI only] Launch Video OpROM po [Legacy only] [Do not Launch] [UEFI only] Other PCI device ROM [UEFI OpROM] [Legacy OpROM] 3.7 Security Settings 3.7.1 Administrator Password 3.7.
Type the password with up to 20 characters and then press Enter key. This will clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press Enter key. You may press Esc key to abandon password entry operation. To clear the password, just press Enter key when password input window pops up. A confirmation message will be shown on the screen as to whether the password will be disabled.
Save Changes and Exit Save & Exit Setup save Configuration and exit ? [Yes] [No] Discard Changes and Ext Exit Without Saving Quit without saving? [Yes] [No] Save Changes and Reset Save & reset Save Configuration and reset? [Yes] [No] Discard Changes and Reset Reset Without Saving Reset without saving? [Yes] [No] Save Changes Save Setup Values Save configuration? [Yes] [No] Discard Changes Load Previous Values Load Previous Values? [Yes] [No] Restore Defaults Load Optimized Defaults Load optimized Defaults?
Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows 7. The software and drivers are included with the motherboard. The contents include Intel chipset driver, VGA driver, LAN drivers, Audio driver Installation instructions are given below. Important Note: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the installation of drivers.
4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1. Select Intel (R) Chipset NM10 Express from the list Step 2. Click Next to setup program.
Step 3. Read the license agreement. Click Yes to accept all of the terms of the license agreement. Step 4. Click Next to continue.
Step 5. Click Next. Step 6. Select Yes, I want to restart this computer now. media from the drives.
4.2 Intel Graphics Media Accelerator Driver To install the VGA drivers, follow the steps below to proceed with the installation. Step 1.Select Intel(R) VGA Chipset Driver. Step 2. Tick Automatically run WinSAT and enable the Windows Aero desktop theme(if supported). Click Next.
Step 3. Read license agreement. Click Yes. Step 4. Click Next.
Step 5. Click Next. Step 6. To restart the computer, select Yes, I want to restart this computer now. Then click Finish.
4.3 Intel (R) Network Adapter To install the Intel (R) Network Adapter device driver, please follow the steps below. Step 1. Select LAN Driver. Step 2. Select ARCHMI-17”~21”.
Step 3. Click Next to Continue. Step 4. Read license agreement. Click Next ARCHMI-7XX User Manual Click I accept the terms in the license agreement.
Step 5. Click Advanced Network Services. Then click Next to Continue. Step 6. Click Install to begin the installation.
Step 7. Click Finish to exit the wizard. 4.4 Realtek ALC662 HD Audio Codec Driver Installation To install the Realtek ALC662 HD Audio Codec Driver, please follow the steps below. Step 1.
Step 2. Click Next to continue. Step 3. Click Yes, I want to restart my computer now. ARCHMI-7XX User Manual Click Finish to complete the installation.
Chapter 5 Touch Screen Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. 5.1 Windows 2000/2003/Vista/WIN7 Universal Driver Installation for PenMount 6000 Series Before installing the Windows 2000/WIN7 driver software, you must have the Windows 2000/WIN 7 system installed and running on your computer.
Step 2. Select Resistive Touch. Step 3. Click Next to continue.
Step 4. Read the license agreement. Click I Agree to agree the license agreement. Step 5. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation.
Step 6. Wait for installation. Then click Next to continue. Step 7. Click Continue Anyway.
Step 8. Click Finish to complete installation. 5.1.2 Installing Software (Projected Capacitive) Step 1. Insert the product CD, the screen below would appear. Click touch panel driver.
Step 2. Select Projected Capacitive. Step 3. Click Next to continue.
Step 4. Select I accept the terms of the license agreement. Step 5. Tick Install RS232 interface driver. ARCHMI-7XX User Manual Click Next. Click Next.
Step 6. Select None. Click Next. Step 7. Click OK. Step 8. Tick Support Muti-Monitor System. ARCHMI-7XX User Manual Click Next.
Step 9. Go to C:\Program Files\eGalaxTouch. Click Next. Step 10. Click Next.
Step 11. Tick Create a eGalaxTouch Utility shortcut on desktop. Click Next. Step 12. Wait for installation.
Step 13. Click Yes to do 4 point calibration. 5.2 Software Functions 5.2.1 Software Functions(Resistive Touch) Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1. After installation, click the PenMount Monitor icon “PM” in the menu bar. 2. When the PenMount Control Panel appears, select a device to “Calibrate.
Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence. After the fifth red point calibration is complete. To skip, press ‘ESC’. Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch panel linearity of aged touch screens. Click this button and touch the red squares in sequence with a stylus. To skip, press ESC’. Command Calibration Command call calibration function.
Step 2.Click “Standard Calibration” to start calibration procedure NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy.
Step 3.Come back to “PenMount Control Panel” and select Tools then click Advanced Calibration. Step 4. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy.
Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM storage The function disable for calibration data to write in Controller. The default setting is Enable. Setting Touch Mode This mode enables and disables the mouse’s ability to drag on-screen icons – useful for configuring POS terminals.
About This panel displays information about the PenMount controller and driver version.
Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows 2000/WIN 7 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit. The PenMount control boards must be connected to the computer COM ports via the RS-232 interface.
2. When the mapping screen message appears, click OK. 3. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens. 4. Touching all screens completes the mapping and the desktop reappears on the monitors. 5. Select a display and execute the “Calibration” function. A message to start calibration appears. Click OK.
6. “Touch this screen to start its calibration” appears on one of the screens. Touch the screen. 7. “Touch the red square” messages appear. Touch the red squares in sequence. 8. Continue calibration for each monitor by clicking Standard Calibration and touching the red squares. NOTES: 1. If you use a single VGA output for multiple monitors, please do not use the Multiple Monitor function. Just follow the regular procedure for calibration on each of your desktop monitors. 2.
Control Panel Open Control Panel Windows Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions. Exit Exits the PenMount Monitor function. PenMount Rotating Functions The PenMount driver for Windows 2000/WIN7 supports several display rotating software packages.
5.2.2 Software Functions(Projected Capacitive) General In this window, you can see there is USB Controller. Click OK to continue.
Setting Beep Beep On Touch Beep On Release Beep From System Beep Beep From Sound Card Linearization Style 9 points 25 points Double Click Time Shorter Longer Double Click Area Smaller Bigger Normal mode Simulate the mouse mode ARCHMI-7XX User Manual 97
Option Function Enable Constant Touch Enable Auto Right Click Enable Touch Enable Cursor Stabilization Constant Touch Area Auto Right Click Time ARCHMI-7XX User Manual 98
Tools Click OK to continue the settings. 4 Points Calibration Do 4 points alignment to match display. Clear and Calibrate Clear linearization parameter and do 4 points alignment. Linearization Do 9 points linearization for better touchscreen linearity. Draw Test Do draw test to verify the touch accuracy.
Display In this window, it shows the mode of display. Enable Multiple Monitors.
Other Other mode of display. Quarter1~4 and Customized area. Active Area Drag active area to enable Active Area Function.
Hardware Saturn Hardware Configuration ARCHMI-7XX User Manual 102
About To display information about eGalaxTouch and its version.
