User manual

24. USB45:

USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4

USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB

full-speed and low-speed signaling.

Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.

If the external USB device current exceeds 1.5A, please separate connectors into

different Receptacle.

25. LAN1/LAN2:

LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M

RJ-45 Ethernet ports are provided. Used Realtek RTL8111E chipset, LINK LED

(green) and ACTIVE LED (yellow) respectively located at the left-hand and

right-hand side of the Ethernet port indicate the activity and transmission state of

LAN.

26. BUZ1:

Onboard buzzer.

27. LED1:

LED STATUS. Green LED for Motherboard Power status.

28. LED2:

LED STATUS. Green LED for Motherboard Standby Power Good status.

29. CN1:

(DF13-40P Connector),For expand output connector, It provides one 18/24bit single

channel LVDS,one Backlight control, two USB ports, one power led, one HDD LED,one

power on/off button, one RESET.

Function

Signal Name

Pin#

Signal Name

Function

LVDS

12V_S0

LVDS

BKLT_EN_OUT

BKLT_CTRL

Ground

LVDS_VDD5

LVDS_VDD3

Ground

LA_DATAP0

LA_DATAN0