User Manual

Apogee ONE | User’s Guide for Windows
Sample Rate Considerations
When setting the Sound Control Panel sample rate, it’s crucial to match this rate with the rate of DAW
sessions that are running simultaneously. So, if you open an Ableton session at 96kHz, you should
set the Sound Control Panel rates to 96kHz as well. This will ensure that you can play the session and
audio from apps like Youtube, Spotify and others without freezes or crashes.
Connect to Headphones or Speakers
Connect headphones to the 1/8” output jack on Apogee ONE’s front panel. Alternatively, you can
connect Apogee ONE’s output to speakers by using an adapter cable. The cable should go from a
stereo 1/8” connection (from ONE) to two separate connectors suitable for your speakers (1/4”, RCA,
etc.).
Configuring Apogee ONE’s Inputs on Windows
 Apogee ONE’s two inputs may be configured in the following manner:
• Internal (built-in) microphone + 1/4” instrument
• External (XLR) microphone + 1/4” instrument
• External 48V (XLR) microphone + 1/4” instrument
When   using   an   XLR   microphone   or   1/4”   instrument,   connect   to   Apogee   ONE’s   breakout   cable.
Page 13