User Manual

Apogee ONE | User’s Guide for Windows
Channel Section
This portion of the Primary Window displays Channels for Analog input, and Playback from audio
software.
1. Channel Top Label  - Indicates the channels
source.
2. Input Channel Level Meter  - Shows the
post-gain digital signal level coming into the
channel.
3. Input Icon  - Shows the input type selected from
the Analog Level drop-down
4. Analog Level - Use this pop-up menu to select the source for Input 1 - the built-in mic (Int
Mic), an external mic connected to the breakout cable’s XLR connector (Ext Mic), or an
external mic that requires phantom power connected to the XLR connector (Ext Mic 48v)
a. Input 2 is always the ¼” connector and can be used for any high impedance (Hi-Z)
instrument. The signal is sent through a Hi-Z to Low-Z conversion circuit before sent
through the microphone preamplifier circuit.
5. Gain Control  - Use to adjust the gain of the microphone preamp. Not available when the input
is set to +4dBu or -10dBV
6. Group - This button groups the gain setting of both inputs so that Apogee ONE’s multi-function
knob or software gain knob controls both input gains simultaneously. If a gain offset is present
between inputs when Group is set to On, this offset is preserved.
Page 19