User Manual

Apogee Element Series User’s Guide

Clear Meters - Clear held peak and overs from Element Control software level meters.

Toggle Talkback - Turn the Talkback function on indefinitely until the button is tapped a

second time to turn it off.

Momentary Talkback - Turn the Talkback function on only when the button is held

down. Releasing the button turns Talkback off.

Analog Input Level - Toggle through an input’s Analog Level settings (+4 dBu, -10 dBV,

Mic, Instrument) when that input is selected for control. If the Headphone

or Speaker output is selected for control and a button assigned to Analog

Input Level is tapped, all LEDs flash for a moment to indicate an invalid

operation.

48V Phantom Power - Toggle 48V Phantom Power on/off for the input selected for

control

Group - Toggle Group on/off for the input selected for control

Soft Limit - Toggle Soft Limit on/off for the input selected for control

Polarity - Toggle Polarity Inversion on/off for the input selected for control

Select Input 1..8 - Select the designated input (1-8) for control. When two interfaces are

connected, use the Toggle Device setting to toggle between Interface A

1-8 and Interface B 1-8.

Toggle Device - Toggle the interface selected for control when two interfaces are

connected. By setting the 8 Function buttons to Select Input 1, Select

Input 2, etc and setting the Control Knob to Toggle Device, it’s possible to

access both interfaces’ mic pre gain setting with only a few button taps.

Launch Element Control - Launch Element Control software or, if software is already

launched, bring the app into keyboard focus.