users manual

Maestro - Apogee ONE User’s Guide
Input Tab on iOS
#
1.
Analog Level - Use this pop-up menu to select %
the source for Input 1 - the built-in mic (Int Mic), %
an external mic connected to the breakout cable’s
XLR connector (Ext Mic), or an external mic that
requires phantom power connected to the XLR
connector (Ext Mic 48v). %
2.
Input Gain - The gain of each input is controlled
with these software knobs. The gain level is
indicated in the value box below the knob. %
Modify gain by 1 dB by touching the “-” or “+”
buttons.%
3.
Analog Input Meter - This meter displays the %
level of the analog input after A/D conversion. %
4.
Group On/Off - This button groups the gain setting
of both inputs so that ONE’s multi-function knob%
or a single software gain knob controls both input
gains simultaneously. If a gain offset is present
between inputs when Group is set to On, this %
offset is preserved. !
21
21
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20