users manual

Getting Started - Apogee ONE User’s Guide
Configuring ONE’s Inputs on Mac
!
!
ONE’s two inputs may be configured in the following manner:
•
Internal (built-in) microphone + 1/4” instrument
•
External (XLR) microphone + 1/4” instrument
•
External 48V (XLR) microphone + 1/4” instrument
When using an XLR microphone or 1/4” instrument, connect to ONE’s breakout cable.
'!
Open Apogee Maestro software (found in your Mac’s Applications folder), %
and select the Input tab. !
!
Select the Analog Level setting that corresponds to the microphone source you’d like
to record. For example, if you have a microphone connected to the XLR connection on
the breakout cable, select Ext Mic from the Analog Level menu on channel 1. If you
would like to utilize ONE’s built-in microphone, select Int Mic. Channel 2’s source is
always the 1/4” Instrument input.!
!
%
Note: If you are using a condenser
microphone that requires phantom power,
select Ext Mic 48V. Phantom power is
indicated on ONE’s display by %
a red dot above the microphone icon.!
8