Specifications

5
Panel Descriptions
1
4
5
8
10
2
3
7
6
9
1. RS-232 Connection
Local PC Connection is made via this RS-232 port.
2. Control Indicators
Indicates whether the DLC24 Control Selector Switch on the rear panel is set to Front Control
or Remote Control.
3. Status Indicators:
Overload- LED indicates clipping at any input or output stage.
Communications- LED indicates PC communication on the unit.
Heartbeat- LED indicates the DSP hardware condition of the unit.
Power- LED indicates power to the DSP.
4. Attenuation Control
Adjusts the assigned output’s level(s). Range is from 0 dB to -60 dB.
5. Limit Indicator
Indicates limiting on one or more of the outputs assigned to that channel.
6. Signal Indicator
Indicates signal is present on input.
7. Polarity Switch
Inverts the assigned output’s signal polarity from 0 degrees to 180 degrees.
Configuration software can disable this function.
8. Filter Switch
Provides a 24 dB/octave high-pass filter, with a corner frequency at 100 Hz, to the assigned output(s).
9. Plastic Lens
The plastic lens of the DLC24 employs light plate technology.
10. Power Switch
Controls AC power to the DLC24.
DLC24 Front Panel