User`s guide
APOGEE ELECTRONICS
18
Ensemble – User’s Guide
Maestro 2
Output Routing
The Output Routing tab window determines how audio software outputs are routed to Ensemble hardware outputs.
Hardware Outputs Columns - The hardware analog and digital outputs of the Ensemble are displayed in these
columns.
Software Output Rows - Available audio software outputs are listed in these rows in pairs (1-2, 3-4, etc).
Mixer Output Rows - The two low latency mixer outputs appear at the bottom of the Software Outputs list, and
may be assigned to one or more hardware output pairs.
Software Output Labels - Once a connection has been made between software and hardware outputs, the soft-
ware output label (consisting of the peripheral prex plus the hardware output label) appears in these elds.
Reset Routing - This button will reset the Output Routing assignments to the default settings. In this case it will
also remove any routing assignments that have been made in the Standalone Routing page. See Standalone
Routing for more info.
Manipulation of the Output Routing Tab Window is essentially the same as the Input Routing Tab Window, with the
important distinction that one software output may be assigned to multiple hardware outputs but multiple software
outputs may not be assigned to one hardware output. Each marker’s range of motion is indicated by the vertical
shading as depicted above by arrows on the Output routing grid.
Note that each marker represents an odd/even pair of audio signals - it’s not possible to route the odd and even sig-
nal of a pair to different destinations.