User`s guide

APOGEE ELECTRONICS

Ensemble – User’s Guide

Maestro 2

Standalone Routing

Hardware Output Columns - The hardware analog and digital outputs of the Ensemble are displayed in these

columns.

Hardware Input Rows - The hardware analog and digital inputs of the Ensemble are displayed in these rows.

Mixer Output Rows - The two low latency mixer outputs appear at the bottom of the Hardware Inputs list, and

may be assigned to one or more hardware output pairs.

Audio connections between hardware inputs and outputs are made by positioning markers on the routing grid at the

intersection of the desired hardware input and output. Similar to the Input and Output Routing grids marker movement

is restricted based on the routing capability of the system. One hardware input may be assigned to multiple hardware

outputs (in effect splitting the signal) but multiple hardware inputs may not be assigned to one hardware output (an

operation which would require the summing of input signals). Each marker’

s range of motion is indicated by the verti-

cal shading on the routing grid, as depicted above by arrows on the Standalone routing grid.