User`s guide

APOGEE ELECTRONICS
Ensemble – User’s Guide
7
6. Recording
Connect a mic to the MIC 1 rear panel connnec-
tion (gure 13).
or an instrument to the HI–Z 1 front panel con-
nection (gure 14).
In Logic, set a track’s input to Analog 1 and
its output to Analog 1/2 and record-enable the
track (gure 15).
Press the front panel INPUT encoder knob until
the Pre 1 LED is lit, and turn encoder to obtain
a proper recording level on the record–enabled
track (gure 16).
You’re now ready to record!
gure 13
gure 15
Getting Started Quickly
gure 16
gure 14