User's Manual

Dual hotkey functions:
Fn+screen brighterf1
Fn+screen dimmerf2
Fn+homef3
Fn+searchingf4
Fn+virtal keyboardf5
Fn+Sirif6
Fn+ Previous Trackf7
Fn+Pause/Playf8
Fn+ Next Trackf9
Fn+Mutef10
Fn+Volume downf11
Fn+Volume upf12
Bluetooth function in Multi-Sync. setting
press fn+key 1BT1 mode(keyboard will connect with iDevice under BT1 mode)
press fn+key 2BT2 mode(keyboard will connect with iDevice under BT2 mode)
press fn+key 3BT3 mode(keyboard will connect with iDevice under BT3 mode)
press fn+key 4BT4 mode(keyboard will connect with iDevice under BT4 mode)
**if you want to back to factory reset, you can press “fn+ID pairing button”, then keyboard unit will be cleaned all
muti-sync. memory inside Bluetooth chipset.”
LED signal description (from right to left)
LED1Red color
LED1 Red color will keep lighting on during recharge process, it will be snuff out when battery full recharge.
2.LED2Blue color
(Pairing, Battery Low status and each BT mode setting status indication)
1.When you turn on power, the LED2 blink 4 times, it represent power on status or it will be in pairing status.
2.The LED will be blink one time when you toggle each BT mode status via fn+BT1 to fn+BT4.
3.When LED2 blink during you are typing each key time till power shut down, it represent battery is low situation,
you have to recharge the keyboard battery immediately.
3.LED3Green color.
It represent upper case status when LED lighting on.
**On/Off slider switch **Slider switch to on, the power will be lighted on status.**
**Slider switch to be turn off, the power will be lighted off**
ID button switch(in keyboard backside)
Press the ID button, keyboard function will become in pairing process.