2-Channel Analog Mic/Instrument Pre-Amp User’s Guide v1.
2-Channel Analog Mic/Instrument Pre-Amp User’s Guide v1.
Mini-MP – User’s Guide APOGEE ELECTRONICS Warnings FCC warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment.
Mini-MP – User’s Guide APOGEE ELECTRONICS Declarations of Conformity Declaration of Conformity—FCC Apogee Mini-MP This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Mini-MP – User’s Guide APOGEE ELECTRONICS OWNER’S RECORD The serial number is located on the rear panel of the unit. We suggest you record the serial number in the space provided below. Refer to it whenever you call an authorized Apogee Electronics repair facility or the manufacturer. Please be sure to return your completed warranty card immediately! Mini-MP Serial No.
Mini-MP – User’s Guide APOGEE ELECTRONICS User’s Guide Table of Contents Introduction .....................................................................................................2 Getting Started Quickly ................................................................................3 Navigating the Front Panel ........................................................................4 48 V ...........................................................................................................
Mini-MP – User’s Guide APOGEE ELECTRONICS Introduction Apogee Electronics’ Mini-MP is a two-channel microphone pre-amplifier with superb performance in a convenient, portable package.
Mini-MP – User’s Guide APOGEE ELECTRONICS Getting Started Quickly 2 3 1 4 6 5 (1) Connect the included power supply to the POWER connection on the back of the Mini-MP and to a convenient AC Outlet. As the power supply’s AC input voltage is automatically sensed, it may be connected to virtually any AC power outlet found worldwide without concern for voltage settings or fuse ratings. (2) Connect either a microphone or instrument to either the L(Left) or R(Right) IN connection on the rear panel.
Mini-MP – User’s Guide APOGEE ELECTRONICS Navigating the Front Panel 7 5 5 1 1 R L L R 3 2 R L 3 L 1) 2) 3) 4) 4 L 4 R 6 2 R 48 V (Left and Right) – These switches engage 48 volt phantom power on the corresponding IN connections, for powering of microphones which require this voltage. To avoid inadvertently switching 48V, the switches must be pressed to the right for approximately 1 second before the function is actually engaged or disengaged.
Mini-MP – User’s Guide APOGEE ELECTRONICS Navigating the Rear Panel 1 1) 2) 3) 3 2 DC POWER - The Mini-MP operates from a high quality external switching power supply, included with the unit. The power supply’s cable may be secured to the unit with the adjacent strain relief tab and thumbscrew. Alternatively, any regulated 6-14 volt DC power supply capable of providing 1.
Mini-MP – User’s Guide APOGEE ELECTRONICS MS Recording and Playback Introduction When recording with a stereo microphone array, the engineer has a wide variety of microphone placement schemes at his disposal, each with specific strengths and weaknesses. One placement may ensure mono compatibility of the recording but result in a rather narrow stereo image, while another placement may create a spacious stereo image but result in phase cancellations and comb filtering when the recording is played in mono.
Mini-MP – User’s Guide APOGEE ELECTRONICS MS Recording and Playback - continued Advanced Techniques To better understand the behavior of signals when employing MS Techniques, the manner in which these signals are routed and summed may be expressed as formulae.
Mini-MP – User’s Guide APOGEE ELECTRONICS Features & Specifications • Superb two-channel microphone preamplifier with phantom power and HI-Z instrument inputs • Low distortion pre-amps with 75dB of gain.
Mini-MP USER’S GUIDE - v.1.