User Guide

Adjusting Input & Output Levels!
Input level
To change ONE’s input level (i.e the preamp gain of microphones and instruments):
1. Push the Controller Knob until the built-in
microphone, external microphone or instrument
icon is lit on ONE’s display.
2. Turn the Controller Knob until the
desired recording level is obtained.
"
The controller knob operates in parallel with Maestro’s
input controls.
Note: You will not hear your input until you enable software monitoring from a recording application or engage the low
latency mixer in Apogee's Maestro control panel (see page 28 for more info).
Output level
1. Push the Controller Knob until the
Speaker icon is lit on ONE’s display.
2. Turn the controller knob to
the desired listening level.
The controller knob operates in parallel with any software
output controls.
Getting Started - Apogee ONE User’s Guide
11