User Guide

Output

Output Tab on Mac

1. Device Icon & ID Button (Mac only) - see the

Input tab description.

2. Analog Output Meter - This meter displays the

level of the analog output before D/A conversion,

in the range -48 to 0 dBFS.

3. Output Selection - This pop-up menu selects the

output source that is sent to the speaker outputs.

A. Select Out 1-2 to send software outputs directly

to the hardware output - when this setting is

selected, the low latency mixer is removed from

the signal path.

B. Select Mixer to send the output of the low

latency mixer to the hardware output.

4. Output Level - This knob controls the speaker

output level.

5. Mute - Click this button to mute the output.

Maestro - Apogee ONE User’s Guide

1515

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20