User`s guide

Symphony Mobile – User’s Guide
16
Installing the X-Symphony card
Installing the X-Symphony card
Your X-Symphony card should include the following:
1 X-Symphony circuit board •
1 X-Symphony Coverplate •
2 aluminium standoffs •
1 plastic standoff •
Remove the top cover of the host interface.
Remove the Option Card coverplate, and set
aside the screws for later use.
Remove the two interface circuit board screws
indicated at left, and set them aside for later use
Install the two aluminium standoffs in the
threaded holes vacated by the screws.
On the X-Symphony card, install the plastic
standoff in the hole adjacent to the multi-pin
motherboard connector.
2
3
4
5
Plastic standoff here
1
2
3
4
5