User's Manual

Make sure the smoother, flatter side of the angle

bracket is placed directly onto the wall.

d. Screw the mounting bracket into the angle

bracket using the short flat screws.

e. Install the mounting bracket directly onto the

angle bracket using the 4 short security screws

(provided).

f. Skip steps 6-8 below.

Step 6: Mark holes for the mounting bracket.

- Place the mounting bracket in the desired location

and mark screw holes for installation. Use the leveler

to check that it is straight.

Step 7: Drill holes in the wall and insert wall anchors (if

needed).

- If you have a stucco, stone, brick, or any other hard

surface, use the drill bit (provided) and power drill to

create the 4 screw holes first, then insert the wall

anchors. If your wall is wood or another softer

surface, then you may skip this step.