Brochure
See Safety & Relief Valve Catalog (SRCA9000) for more detailed information about the products in this section.
73
TPC 18C500 SERIES
HIGH CAPACITY COMMERCIAL T&P VALVES
The Apollo 18C-500 Series bronze automatic temperature and pressure relief
valves are used for protection of high capacity commercial hot water heaters
and storage tanks.
FEATURES
• 3/4” through 2” NPT connections
• ASME Section IV certied capacity
• CSA listed and Certied to ANSI Z21.22
• 125 and 150 psig set pressures at 210°F max
• Coated element protects against corrosion
• SS elements (1-1/2” and 2”)
• Canadian Registration Number CRN-0G1438.6C
• Made in USA
Series
Number
Size (in.)
Element
Length (in.)
Inlet Type
CSA Capacity
Rating
Btu/HR
*ASME Cap.
Rating
BTU/HR
18C5113125 3/4” 2.69” M 185,000 1,619,000
18C5113150 3/4” 2.69” M 185,000 1,912,000
18C5115125 3/4” 4.38” M 205,000 1,619,000
18C5115150 3/4” 4.38” M 205,000 1,912,000
18C5118125 3/4” 7.56” M 205,000 1,619,000
18C5118150 3/4” 7.56” M 205,000 1,912,000
18C5123125 3/4” 2.88” F 185,000 1,619,000
18C5123150 3/4” 2.88” F 185,000 1,912,000
18C5125125 3/4” 4.56” F 205,000 1,619,000
18C5125150 3/4” 4.56” F 205,000 1,912,000
18C5128125 3/4” 7.75” F 205,000 1,619,000
18C5128150 3/4” 7.75” F 205,000 1,912,000
18C5213125 1” 3.06” M 500,000 1,825,000
18C5213150 1” 3.06” M 500,000 2,155,000
18C5215125 1” 4.75” M 500,000 1,825,000
18C5215150 1” 4.75” M 500,000 2,155,000
18C5225125 1” 4.75” F 750,000 3,070,000
18C5225150 1” 4.75” F 750,000 3,625,000
18C5228125 1” 8.13” F 750,000 3,070,000
18C5228150 1” 8.13” F 750,000 3,625,000
18C5314125 1-1/4” x 1” 3.97” M 750,000 3,070,000
18C5314150 1-1/4” x 1” 3.97” M 750,000 3,625,000
18C5424125 1-1/2” 4.13” F 1,200,000 5,125,000
18C5424150 1-1/2” 4.13” F 1,200,000 6,050,000
18C5513125 2” x 1-1/2” 3.25” M 1,200,000 5,125,000
18C5513150 2” x 1-1/2” 3.25” M 1,200,000 6,050,000
* National Board certied capacity per ASME Section IV-Heating Boilers
Series
Number
Inlet Size (in./mm.)
Dimensions (in./mm.)
A B C
18C511
3/4” M x 3/4” FNPT 1.50 3.47 2.53
(20) (40) (88) (64)
18C512
3/4” F x 3/4” FNPT 1.50 3.47 2.35
(20) (40) (88) (60)
18C521
1” M x 1” FNPT 1.56 3.47 2.38
(25) (40) (88) (60)
18C522
1” F x 1” FNPT 1.56 3.47 2.13
(25) (40) (88) (54)
18C531
1-1/4” M x 1” FNPT 1.75 4.34 1.91
(32) (44) (110) (49)
18C542
1-1/2” M x 1-1/2” FNPT 2.47 5.84 1.71
(40) (63) (148) (43)
18C551
2” M x 1-1/2” FNPT 2.47 5.84 259
(50) (63) (148) (66)
A
S
M
E
HV
Special statement regarding T&P Valves and compliance to the Lead Free requirements of the U.S. Safe
Drinking Water Act.
Eective January 4th 2014 the SDWA requires that pipes, ttings or xtures used to convey or dispense potable
water must be lead free. Further clarication has been provided by the EPA in a document titled “Summary of
the Reduction of Lead In Drinking Water Act and frequently Asked Questions”. The latest document can be
viewed on our website: www.apollovalves.com/lead_free; click on the NEW EPA FAQ link.
FAQ #6 states that water heaters are covered by the Act and must comply. However most water heater OEM’s
are certifying their heaters as complete assemblies using non-Lead Free T&P valves due to their relatively small
wetted surface area.
FAQ #23 acknowledges this and states that replacement parts (including T&P valves) need not be lead free
as long as the entire water heater with all installed components overall device would meet the Lead Free
requirements of the Act.
RELIEF VALVES
pressure & temperature