Brochure

See Safety & Relief Valve Catalog (SRCA9000) for more detailed information about the products in this section.
65
RVS 32 & RVS 52 10322, 10512 SERIES
ASME SECTION VIII STEAM SAFETY VALVES
National Board capacity certied safety valves; brass body with optional satin
or polished chrome nish. Protects against excess pressure from thermal
expansion and steam caused by failure of BTU input controls. Ideally suited
for OEM applications such as steam cookers, autoclaves, sterilizers, coee
makers and similar equipment.
FEATURES
• Pressure settings 15 to 60 psig
• Discharge capacities to 725 lbs./hr.
• Stainless steel springs
• 10512 - Silicone soft seat for tight shut-o
• 10322 - EPDM soft seat for tight shut-o
• Registered in all Canadian Provinces and Territories, CRN #0G8547.5C
• Made in USA
Series
Number
Size (in.)
Pressure
Range psig
Height
Wt./100
(lbs.)
Inlet NPT Outlet NPT
10-322 3/4 M 3/4 F 20-60 3.75 128
10-512 1/2 M 1/2 F 15-60 2.62 58
10512
10322
MODEL NUMBERING SYSTEM
10  X X XX X
MODEL AND SIZE IN. FINISH SET PRESSURE OPTIONS
512 = 1/2 x 1/2 B = Plain Brass Set Pressure in PSIG CE = PED/CE
322 = 3/4 x 3/4 S = Satin Chrome (2 Digits) S = Stainless Steel trim
P = Polished Chrome V = Viton® Seat
A
S
M
E
UV
ASME Section IV Low Pressure Steam Safety Valves
RVS 14 14200 SERIES
HIGH CAPACITY LOW PRESSURE STEAM BOILER SAFETY VALVES
National Board capacity certied in accordance with ASME Section IV at 15
psig. For commercial and industrial boilers. Capacities up to 6843 lbs./hr.
FEATURES
• EPDM o-ring for positive seal
• One piece body, all bronze construction
• PTFE coated piston
• Chrome plated Bronze body seat
• Optional test gag available for hydrostatic testing (add “G” sux)
• Registered in all Canadian Provinces and Territories, CRN #0G8547.5C
• Made in USA
Series
Number
Size (in.)
*Capacity
lbs./hr.
Dimensions (in.)
Wt./100
(lbs.)
A B C
14-205-08 2 x 2 3150 3.00 7.12 3.12 8.4
14-206-08 2-1/2 x 2-1/2 4676 3.50 8.25 3.50 13.0
14-207-08 3 x 3 6843 4.12 9.37 3.87 17.0
* National Board Capacity Certied at 15 psig.(90% of actual capacity at 33%
accumulation.)
Note: When ordering specify pressure by adding the two digit key number after the part
number as follows: 5 psig - 03; 6 psig - 04; 8 psig - 05; 10 psig - 06; 12 psig - 07;
15 psig - 08
B
A
C
A
S
M
E
HV
SAFETY VALVES