Brochure
BALL VALVES
Customer Service (704) 841-6000
For additional information, submittal sheets and manuals, visit www.apollovalves.com
51
Versatile Iron Ball Valves (International)
B
A
C
IBV125 SERIES 6P & 6Q SERIES
6P CAST IRON FULL PORT CLASS 125 FLANGED BALL VALVE
Meets MSS SP-72, ANSI B16.10 performance standards. Can be used to replace
IBBM gate valve or plug valve. Low prole handle for easy installation in tight areas.
FEATURES
• 200 CWP/ 125 SWP
• 350° F max.
• Full port design in all sizes oers superior ow rate
• No bronze seat rings, disc rings or stems to wear out
• Quarter-turn operation oers instant, positive shut o with zero leakage
• Gear operator standard for 8” and 10”
• Stainless steel ball resists corrosion
• Handle indicates valve operation status
• Large actuator mounting pad standard
• Blowout-proof stainless steel stem
• PTFE seats and packing, not nitrile or EPDM
6Q EPOXY COATED DUCTILE IRON FULL PORT CLASS 125 FLANGED BALL VALVE
All of the same design and construction features of the 6P ductile iron
construction plus an FDA-approved, heat fused epoxy coating. Rated 200
CWP @ 200°F.
IBV Model
Number
IBVE Model
Number
Size
(in.)
Dimensions (in.)
Wt.
A B C D
6P-208-01 - 2 7.00 6.00 9.00 3.00 22.0
6P-209-01 6Q-209-01 2-1/2 7.50 7.00 16.00 3.70 34.0
6P-200-01 6Q-200-01 3 8.00 7.50 16.00 4.00 38.0
6P-20A-01 6Q-20A-01 4 9.00 9.00 19.70 4.80 58.0
6P-20C-01 6Q-20C-01 6 10.50 11.00 26.00 7.20 118.0
6P-20E-01 - 8* 11.50 13.50 - 9.24 345.0
6P-20G-01 - 10* 13.00 16.00 - 11.81 440.0
* with manual gear operator
These valves are being discontinued. After current stock is depleted; this valve will be replaced by the Lead
Free 6PLF Series. See page 52.
6P
6Q