Brochure
BALL VALVES
Customer Service (704) 841-6000
21
Common Ball Valve Options
Apollo oers these options on the 70 Series as well as many other valve series. Note: Not all
options are available on all sizes and models. Review the latest submittal sheet or contact the
factory to determine availability.
STANDARD BALL VALVE WITH STEM EXTENSION
A plated steel stem extension to accommodate 2” thick pipe insulation or to relocate handle
position.
-04
2-1/4”
Stem Extension
-16 or -58
CHAIN LEVER BALL VALVES
Reliable quarter turn operation in overhead applications. A favorite for use in industrial
environments.
• Specify sux -16 for assembly with valve in vertical position
• Specify -58 for valve in horizontal position
-07
THREADED VALVE WITH TEE HANDLE
Plated steel tee handle is ideal when space is limited and where safety is a consideration.
Handle still provides visual indication of OPEN or CLOSED position.
-08
90° REVERSED STEM
Used in applications when handle is required to be in a parallel position when closed.
-11
THERMASEAL® HANDLE NEW UL 2043 CLASSIFIED
The Therma-Seal thermal insulating tee-handle is designed to be use in applications where
vapor barrier piping insulation is required. Manufactured from high strength glass reinforce
nylon, these handles are ideally suited for the toughest commercial and industrial applications.
Handles are available as a factory installed option (-11 option sux) or as a kit for retro ts.
-17
ROUGH CHROME PLATING
Use where a clean, bright nish is required or for matching up with other chrome-plated
equipment.
STAINLESS STEEL LEVER AND NUT
Additional corrosion resistance for damp or outdoor installations.
-10
Sux No.