Brochure

BALL VALVES
Customer Service [phone]
For additional information, submittal sheets and manuals, visit www.apollovalves.com
31
TAPPING
1/4" - 3/4": #10-24 UNC
1" & 1-1/4": 1/4"-20 UNC
1-1/2" & 2": 5/16"-24 UNF
2-1/2": 1/4"-20 UNC
SIZES 1/4" - 1-1/4"
SIZES 1-1/2" - 2-1/2"
G
F
OA
E
C
B
D
F
G
Ball Valves – Full Port
77100 SERIES
HEAVY DUTY FULL PORT NPT PANEL MOUNT BALL VALVE
Designed for easy actuator mounting or panel mounting where highest Cv
values are desired. RPTFE seats and stung box ring. Also available with 250
lb. steam trim option.
FEATURES
• Mounting pad
• ASTM B584 Bronze
• Blowout-proof stem design
• Adjustable packing gland
• Full ow, minimum pressure drop
• 600 CWP, non-shock pressure rating
• 150 SWP steam rating
• Chain lever kits available 3/4”- 2-1/2” (-16, -58)
Model
Number
Size
(in.)
Dimensions (in.)
A B C D E F G Cv*
77-101-01 1/4 0.43 1.12 2.25 1.81 3.87 0.50 1.12 8.1
77-102-01 3/8 0.50 1.12 2.25 1.81 3.87 0.50 1.12 15
77-103-01 1/2 0.50 1.12 2.25 1.81 3.87 0.50 1.12 15
77-104-01 3/4 0.81 1.56 3.12 2.12 4.87 0.87 1.37 51
77-105-01 1 1.00 1.81 3.62 2.62 5.50 0.93 1.50 68
77-106-01 1-1/4 1.25 2.12 4.25 2.87 5.50 0.93 1.50 125
77-107-01 1-1/2 1.50 2.37 4.75 3.34 8.00 2.08 3.06 177
77-108-01 2 2.00 2.65 5.37 3.71 8.00 2.41 3.52 389
77-109-01 2-1/2 2.50 3.25 6.50 4.12 8.00 2.75 3.37 503
* The Cv factor is the gallons of water per minute that the valve will pass with 1 psig
pressure drop.
77 OPTIONS INCLUDE:
• 2-1/4” Stem Extension Latch
Lock Lever (-27)
• Balance stop (-92)
77200 SERIES
HEAVY DUTY FULL PORT SOLDER END BALL VALVE
Designed to be soldered into lines without disassembly. This allows a factory
tested valve to be installed without disturbing the seats and seals. Designed
for soft solder with melt points less than 500°F.
FEATURES
• Heavy duty cast bronze body
• Chromium plated ball
• Blowout-proof stem design
• Adjustable packing gland
• Full ow, minimum pressure drop
• 600 CWP, non-shock pressure rating
• 150 SWP
Model
Number
Size
(in.)
Dimensions (in.)
A B C D E F G
77-204-01 3/4 0.81 2.12 4.12 2.12 4.87 0.88 0.75
77-205-01 1 1.00 2.33 4.60 2.62 5.50 1.13 0.90
77-206-01 1-1/4 1.25 2.60 5.15 2.87 5.50 1.38 0.96
77-207-01 1-1/2 1.50 3.00 6.00 3.34 8.00 1.63 1.09
77-208-01 2 2.00 3.62 7.24 3.71 8.00 2.13 1.34
77-209-01 2-1/2 2.50 3.93 7.87 4.12 8.00 2.63 1.48