Installation Instructions

Matthews, NC 28105
www.apolloow.com
I-Manifolds_07/19/12
PEX
PEX Manifolds
PEX Manifolds
How to install:
1. Count the number of cold and hot water locations in the house. Be sure to include outside hose
bibs and the refrigerator ice maker.
2. Make sure the manifold has as many ports as the house has hot and cold locations.
3. Find an accessible location near the water heater, but not closer than 18" from the water heater
outlet, to place the manifold.
4. Attach the shut off valves. To create a 3/4" PEX pipe inlet, attach the included adapters. For a 1"
MPT pipe inlet, leave the inlet as is.
5. Position the manifold in the desired location and nail or screw the mounting bracket to the studs.
Make sure all valve handles have room for operation.
6. Attach pipe to inlets. Attach 1/2" PEX pipe to the outlets and crimp or clamp securely. Close
and cap all unused manifold ports.
7. Label each connection to the water location it supplies. Labels are included with each Apollo
manifold.
PEX
12-Port Manifold
Installed manifold

Summary of content (2 pages)