Specification

ManualsBrandsApollo ManualsManifold Valves36-Port PEX Manifold with 1/2 in. Brass Ball Valves

SUBMITTAL SHEET

PEX

Manifolds

PEX

Apollo

PEX Manifolds are designed for potable water systems with the use of

PEX pipe to control the ow of water to all xtures.

All Apollo

PEX Manifolds comply with the U.S. Safe Water Drinking Act (SDWA)

and the 2011 U.S. Reduction of Lead in Drinking Water Act by containing equal

to or less than 0.25% lead.

The inlets to the manifold are 1" MPT. The outlets on each side of the manifold

are 3/4" MPT. The two inlet adapters that come with the manifold are 3/4"

NPMT x 3/4" PEX. The shuto valves that come with each manifold are 3/4" FPT

w/ Swivel x 1/2" PEX. Apollo

PEX Manifolds can be used with Apollo

brand

PEX-A or PEX-B pipe.

Specications:

Use Apollo

PEX Manifolds with Apollo

PEX-A or PEX-B pipe and fasten using Apollo

Crimp

Rings, Apollo

Pinch Clamps, or Apollo

Crimp Sleeves with Apollo

PEX Tools. Follow all

instructions included with Apollo

tools, fittings, and fasteners.

Approvals:

• ASTM F877

• NSF/ANSI 14 and 61

Pressure & Temperature:

• 160 psi @ 73° F, 100 psi @ 180° F

Installation:

1. Count the number of cold and hot water locations in the house. Be sure to include outside hose bibs and the refrigerator ice maker.

2. Make sure the manifold has as many ports as the house has hot and cold locations.

3. Find an accessible location near the water heater, but not closer than 18” from the water heater outlet, to place the manifold.

4. Attach the shut o valves.

5. Position the manifold in the desired location and nail or screw the mounting bracket to the studs. Make sure all valve handles have room for operation.

6. Attach 1/2” PEX pipe to the inlets and outlets and crimp or clamp securely. Close and cap all unused manifold ports.

7. Label each connection to the water location it supplies. Labels are included with each Apollo manifold.

Job Name:

Job Location:

Engineer:

Contractor:

Tag:

PO Number:

Representative:

Summary of content (2 pages)

PAGE 1
PEX SUBMITTAL SHEET PEX Manifolds Job Name: Job Location: Engineer: Contractor: Tag: PO Number: Representative: Apollo PEX Manifolds are designed for potable water systems with the use of PEX pipe to control the flow of water to all fixtures. ® All Apollo® PEX Manifolds comply with the U.S. Safe Water Drinking Act (SDWA) and the 2011 U.S. Reduction of Lead in Drinking Water Act by containing equal to or less than 0.25% lead. The inlets to the manifold are 1" MPT.
PAGE 2
PEX Manifolds Part Number 6907912CP 12 Port Manifold 6907984CP 16 Port Manifold Description L W D Wt (lbs) 6907912CP 12 Port Manifold 13.00" 8.75" 3.38" 4.75 6907984CP 16 Port Manifold 15.50" 8.75" 3.38" 5.46 6907920CP 20 Port Manifold 22.00" 8.75" 3.38" 7.47 6907924CP 24 Port Manifold 26.00" 8.75" 3.38" 8.15 6907928CP 28 Port Manifold 28.25" 8.75" 3.38" 10.11 6907932CP 32 Port Manifold 31.25" 8.75" 3.38" 11.27 6907936CP 36 Port Manifold 35.25" 8.75" 3.