Instructions / Assembly

INSTRUCTION SHEET

PEX

Manifold Systems

PEX

1. Count the number of cold and hot water locations in the house. Be sure to include outside hose bibs and the refrigerator ice maker.

2. Make sure the manifold has as many ports as the house has hot and cold locations.

3. Find an accessible location near the water heater, but not closer than 18" from the water heater outlet, to place the manifold.

4. Attach the shut o valves. To create a 3/4" PEX pipe inlet, attach the included adapters. For a 1" MPT pipe inlet, leave the inlet as is.

5. Position the manifold in the desired location and nail or screw the mounting bracket to the studs. Make sure all valve handles have room for

operation.

6. Attach pipe to inlets. Attach 1/2" PEX pipe to the outlets and crimp or clamp securely. Close and cap all unused manifold ports.

7. Label each connection to the water location it supplies. Labels are included with each Apollo manifold.

12-Port Manifold

Installed manifold

6907912CP - 12 Port Manifold

6907984CP - 16 Port Manifold

6907920CP - 20 Port Manifold

6907924CP - 24 Port Manifold

6907928CP - 28 Port Manifold

6907932CP - 32 Port Manifold

6907936CP - 36 Port Manifold

APXFF1212S - Replacement Valve

APXFA34B1F - Replacement Adapter

For replacement parts, call 1.888.229.2874.

PAGE 1
PEX INSTRUCTION SHEET PEX Manifold Systems 6907912CP - 12 Port Manifold 6907984CP - 16 Port Manifold 6907920CP - 20 Port Manifold 6907924CP - 24 Port Manifold 6907928CP - 28 Port Manifold 6907932CP - 32 Port Manifold 6907936CP - 36 Port Manifold APXFF1212S - Replacement Valve APXFA34B1F - Replacement Adapter 12-Port Manifold Installed manifold 1. Count the number of cold and hot water locations in the house. Be sure to include outside hose bibs and the refrigerator ice maker. 2.
PAGE 2
PEX INSTRUCTION SHEET PEX Manifold Systems Warnings • Before and after installation, ensure manifold is kept in a location with limited exposure to chemicals, paint, hazardous materials, debris, excessive heat, direct flame, or moving objects that could cause damage. • The manifold should be located in an area that will not be covered permanently with sheetrock, plywood, or paneling. • Manifold should not be installed or kept in a location exposed to freezing temperatures.