Installation Guide

11) With the ball in the closed position, thread the retainer into the body and

torque to manufacturing specification to secure the body joint. Contact factory

for torque values.

12) Cycle the valve to the open position and verify proper operation and alignment

of handle and/or mechanism.

Note: Always test valve and system before putting the system into service.

PARTS ILLUSTRATION

SCALE: DRN: CHKD: NO. REV.

NAME:

MAT'L:

EXP. NO.

CHANGE DESCRIPTIO N

ECN NO.

BY DATEREV.

APP'D:DATE:

NOTE: This drawing and the subject matter disclosed therein is the property of Conbraco Industries, Inc. and is not to be

copied, used, appropriated or disclosed to others without the expressed written permission of Conbraco Industries, Inc.

NO DESCRIPTION

STEM

STEM NUT

PACKING GLAND SCREW

PACKING

STEM BEARING

SEAT

BALL

RETAINER

BODY

HANDLE

Page 4 I414500. Rev C

3 – WAY DIVERSION BALL VALVES

70600, 70900 and 76600 SERIES

INSTALLATION, OPERATION & MAINTENANCE GUIDE

PAGE 1
1) With the ball in the closed position, thread the retainer into the body and torque to manufacturing specification to secure the body joint. Contact factory EXP. NO. SCALE: DRN: DATE: CHKD: APP'D: for torque values. R NO. REV. NAME: 12) Cycle the valve to the open position and verify proper operation and alignment MAT'L: of handle and/or mechanism. N OTE: This drawing and the subject matter disclosed therein is the property of Conbraco Industries, Inc.
PAGE 2
Page 1 INSTALLATION Two piece threaded and solder end Apollo Ball valves are bi-directional. They may be installed in vertical or horizontal pipe runs without regard to flow direction and without regard to stem orientation. Note: Valves must be installed in piping systems that comply with the applicable portions of the ASME B31 standards. Special considerations must be taken with respect to pipe line expansions and contractions and the media expansion and contractions within the piping system.
PAGE 3
Amendment Register Date ECN Revision Page 07/16/18 M16975 C 1-2 Description Updated NPT thread instructions & SDWA warning Initiator Reviewed DRP WGH In accordance with the U.S. Safe Drinking Water Act (SDWA), it is illegal to use this product in the United States for potable water services (water intended for human consumption).