Specification

SUBMITTAL SHEET
This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without
notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.
Most current information available at apollovalves.com.
[phone]
apollovalves.com
DESCRIPTION
The Apollo® 70LF-HC models are ideally suited for direct connection to hoses. Valves feature a heavy duty machined hose thread cover with heavy duty
stainless steel chain to prevent loss. Standard lever and nut and ball chain are stainless steel.
FEATURES
• NPT or Solder End x 3/4”-11.5 NH
• Full Pressure Rated Heavy Brass Hose Cap
• EZ-Solder™ Lead Free* Brass & Bronze Materials**
• Distinctive White “Lead Free” Handle Grip
and Blue “Lead Free” Hang Tag
• Blowout-Proof Stem Design
• Adjustable Packing Gland
• Premium RPTFE Seats and Stem Packing
• Stainless Steel Lever and Stem Nut, Ball Chain
• 100% Factory Tested
• Made in USA
PERFORMANCE RATING
• Maximum Pressure: 600 psi CWP
• Maximum Temperature: 210°F
• Vacuum Service to 29 in. Hg
APPROVALS
• MSS SP-110 - Ball Valves Threaded, Socket-
Welding, Solder Joint, Grooved and Flared Ends
• NSF/ANSI 61 - Water Quality
• NSF/ANSI 372 - Lead Free
• ANSI/ASME B1.20.7 Hose Thread
OPTIONS
• (-04) 2-1/4” CS Stem Extension 1/2” - 1”
• (-07) Steel Tee Handle 1/2” - 1”
• (-11) Therma-Seal
TM
Insulating Tee Handle 1/2” - 1”
• (-15) Wheel Handle, Steel 1/2” - 1”
• (-27) SS Latch-Lock Lever & Nut 1/2” - 1”
• (-94) 2-1/4” Extension
w/ Balancing Stop 1/2” - 1”
• 70LF-140 & 70LF-240 series
w/ SS Ball & Stem
D
C
B
A PORT
G
H
E
F
DIMENSIONS
PART
NUMBER
SIZE
(IN.)
DIMENSIONS (IN.)
WT.
(LB.)
A B C D E F G H
NPT X 3/4" HOSE THREAD
70LF-103-HC 1/2" 0.50 1.09 2.75 2.99 1.94 4.18 - - 0.63
70LF-104-HC 3/4" 0.68 1.50 3.41 3.66 2.32 5.31 - - 1.30
70LF-105-HC 1” 0.87 1.92 3.92 4.16 2.43 5.28 - - 1.72
SOLDER X 3/4" HOSE THREAD
70LF-203-HC 1/2" 0.50 1.42 3.08 3.32 1.94 4.18 0.63 0.50 0.71
70LF-204-HC 3/4" 0.68 1.93 3.84 4.09 2.32 5.31 0.88 0.75 1.44
STANDARD MATERIALS LIST
LEVER AND GRIP
Stainless Steel w/ Vinyl
STEM PACKING
MPTFE
STEM BEARING
RPTFE
BALL
C27451 Lead Free* Brass, Chrome Plated
SEAT (2)
RPTFE
RETAINER
C27451 Lead Free* Brass
GLAND NUT
C27451 Lead Free* Brass
STEM
C27451 Lead Free* Brass
LEVER NUT
Stainless Steel
BODY
C89836 Lead Free* Bronze
HOSE CAP
ASTM B16 Brass
BALL CHAIN
Stainless Steel
**70LF-2xxHC intended for soft solder installation
using solders with melting temperature of < 500°F.
*LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law 111-380. ANSI 3rd party approved and listed.
Job Name:
Job Location:
Engineer:
Contractor:
Tag :
PO#:
Rep:
Wholesale Dist.:
Bronze Ball Valve with 3/4” Hose Connection and Protective Cap & Chain
70LF-100/200 HC Series
LEAD FREE
SS1275 © 08/18 Page 1 of 1