TDS

Customer Service [phone] industrial.apollovalves.comA-18
Female NPT Thread, 1/4”-3” 1000 CWP (psig), Cold Non-Shock. (See referenced P/T chart)
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 Compliant.
Designed, cast, machined, assembled, and 100% factory tested in USA.
FEATURES
• Investment cast components
• Reinforced seats
• Blowout-proof stem design
• Adjustable packing gland
• Stainless steel lever and nut
• Fire safe to API 607 (requires -24 sux)
• Meets NACE MR0175 (2000) & MR0103 (2012)
• CSA CGA 3.16-M88 (Requires “GS” sux)
• NSF/ANSI/CAN 61 Section 8, Annex G (1/4” to 2”)
• NSF/ANSI 372 - Drinking Water System Components - Lead Content
STANDARD MATERIAL LIST
PART MATERIAL
1
Stem packing MPTFE
2
Stem bearing RPTFE
3
Ball
A276-316SS (1/4” to 2”, except 1-1/4”)
A276-316SS or A351-CF8M stainless (1-1/4”)
A351-CF8M stainless (3”)
4
Seat (2) RPTFE (2” & smaller); RTFM (3”)
5
Retainer
ASTM A276-316SS (1/4” & 3/8”)
ASTM A351-CF8M stainless (1/2” to 3”)
6
Gland A276-316 Stainless Steel
7
Stem A276-316 Stainless Steel
8
Lever nut 304 Stainless Steel
9
Body Seal RPTFE (1/2” to 3”)
10
Body A351-CF8M
11
Lever and grip SS w/vinyl
OPTIONS AVAILABLE
(MORE INFORMATION IN SECTION J)
• Minimum quantities apply
• To specify an option, replace the “01” standard sux with the sux of the option.
• To specify multiple options, replace the “01” sux with the desired suxes in the
numerical order shown below. NOTE: Not all suxes can be combined together.
(SUFFIX) OPTION SIZES
-01 Standard Configuration All
-P -01- BSPP (Parallel) Thread Connection 1/2” to 2”
-T -01- BSPT (Tapered) Thread Connection 1/2” to 3”
-02- Stem Grounded 1/2” to 3”
-04- 2-1/4” Stem Extension (Carbon Steel, Zinc Plated) 1/2” to 2”
-08- 90º Reversed Stem 1/2” to 2”
-11- Therma-Seal™ Insulating Tee Handle 1/4” to 2”
-14- Side Vented Ball (Uni-Directional) 3/8” to 3”
-24-
Graphite Packing, PTFE Body Seal,
RPTFE Bearing (API 607, 6th Edition, ISO 10497:2010)
1/2” to 3”
-27- SS Latch-Lock Lever & Nut 3/8” to 3”
-30- Cam-Lock and Grounded 1/2” to 2”
-32- SS Tee Handle & Nut 1/2” to 2”
-35- PTFE Trim 3”
-39- SS Hi-Rise Locking Wheel Handle, SS Nut 1/2” to 2”
-40- Cyl-Loc and Grounded 1/2” to 2”
-44- Seal Welded All
-45- Less Lever & Nut 1/2” to 3”
-46- Latch Lock Lever - Lock in Closed Position Only 1/2” to 2”
-47- SS Latch Lock Oval Handle 1/2” to 2”
-48- SS Oval Handle (No Latch) & Nut 1/4” to 2”
-49- No Lubrication. Assembled Dry. 1/2” to 3”
-50- 2-1/4” CS Locking Stem Extension 1/2” to 2”
-56- Multifill Seats & Packing 1/2” to 3”
-57- Oxygen Cleaned All
-60- Static Grounded Ball & Stem 1/2” to 3”
-GS- CSA CGA 3.16 (RTFE Seat - All sizes) All
-UA- AIS (American Iron & Steel) Compliant All
Pressure/Temperature Ratings - Page M-12, Graph No. 8
DIMENSIONS
PART NO. SIZE A B C D E F WT.
76F-101-01 1/4” 0.37 0.95 1.91 1.12 1.60 3.85 0.47
76F-102-01 3/8” 0.37 0.95 1.91 1.12 1.60 3.85 0.44
76F-103-01A 1/2” 0.50 1.21 2.35 1.27 1.73 3.85 0.57
76F-104-01A 3/4” 0.81 1.39 2.77 1.62 1.96 3.85 0.91
76F-105-01A 1” 1.00 1.67 3.34 2.00 2.27 4.75 1.38
76F-106-01A 1-1/4” 1.25 1.96 3.92 2.73 3.21 7.77 4.17
76F-107-01A 1-1/2” 1.50 2.05 4.10 2.92 3.31 7.77 4.69
76F-108-01A 2” 2.00 2.37 4.74 3.75 3.69 7.77 6.90
76F-100-01A 3” 3.00 3.70 7.40 5.68 5.23 10.00 22.40
F
E
B
C
D
7
8
11
5
10
6
1
3
4
2
9
A
F
E
B
C
D
7
8
11
5
10
6
1
3
4
2
9
A
REV. 18JUL19
STAINLESS STEEL FULL PORT BALL VALVE
76F-100-A SERIES
*LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law 111-380. ANSI 3rd party approved and listed.