Specification

ManualsBrandsApollo ManualsCouplings & Adaptors3/4 in. x 1/2 in. Brass PEX Barb Reducing Coupling

SUBMITTAL SHEET

PEX

Brass Fittings

PEX

Apollo

PEX Brass Fittings are used for making junctions or directional

changes with PEX pipe constructed potable water systems.

All Apollo

PEX Brass Fittings comply with the U.S. Safe Water Drinking

Act (SDWA) and the 2011 U.S. Reduction of Lead in Drinking Water Act by

containing equal to or less than 0.25% lead.

All Apollo

PEX Brass Fittings have barb ends unless otherwise noted.

Apollo

PEX Brass Fittings can be used with Apollo

brand PEX-A or PEX-B

pipe.

Specications:

Use Apollo

PEX Brass Fittings with Apollo

PEX pipe and fasten to pipe using Apollo

Crimp

Rings, Apollo

Pinch Clamps, or Apollo

Crimp Sleeves with Apollo

PEX Tools. Follow all

instructions included with Apollo

tools, fittings, and fasteners.

Approvals:

• ASTM F877 and F1807 Conformance - Third Party Certied

• NSF 14 and 61

• IAPMO

• CSA B137.5

Installation:

Squarely cut PEX pipe to desired length. Slide crimp ring or pinch clamp over end of pipe.

Slide pipe over fitting until it touches the shoulder of the fitting. Slide the crimp ring

1/8"-1/4" from the end of the pipe and over the fitting ribs closest to the end of the fitting.

Position the tool and compress completely according to tool instructions. Check crimp ring

compression with a Go/No-Go Gauge.

Job Name:

Job Location:

Engineer:

Contractor:

Tag:

PO Number:

Representative:

Summary of content (2 pages)

PAGE 1
PEX SUBMITTAL SHEET PEX Brass Fittings Job Name: Job Location: Engineer: Contractor: Tag: PO Number: Representative: Apollo PEX Brass Fittings are used for making junctions or directional changes with PEX pipe constructed potable water systems. ® All Apollo® PEX Brass Fittings comply with the U.S. Safe Water Drinking Act (SDWA) and the 2011 U.S. Reduction of Lead in Drinking Water Act by containing equal to or less than 0.25% lead. All Apollo® PEX Brass Fittings have barb ends unless otherwise noted.
PAGE 2
PEX Couplings Male Adapters Part Number Description H W D Wt (lbs) Part Number Description H W D Wt (lbs) APXC3838 3/8" x 3/8" 0.500 1.500 0.500 0.230 APXMA3812 3/8" x 1/2" MPT 1.000 1.438 1.000 0.072 APXC1238 1/2" x 3/8" 0.625 1.375 0.625 0.280 APXMA1212 1/2" x 1/2" MPT 1.120 1.500 1.120 0.081 APXC1212 1/2" x 1/2" 0.625 1.375 0.625 0.330 APXMA1234 3/4" x 1/2" MPT 1.125 1.500 0.875 0.121 APXC1234 3/4" x 1/2" 0.875 1.500 0.875 0.