USER MANUAL 17” Compact Panel DI170S01-A01 TFT Display + Backlight inverter + RGB board in one chassis Orderable P/N: SA-02-015 Rev 1 May 23, 2005 The information given in this document is carefully checked and believed to be reliable. However, Apollo takes no response for any failure or product damage caused by the application of this information. Please check all connections carefully with the data sheet.
User Manual DI170S01-A01 Table of Contents 1 Revision History ............................................................................................................................ 3 2 General Description .................................................................................................................... 3 3 Absolute Maximum Ratings ..................................................................................................... 3 4 Absolute Ratings of Environment ................
User Manual DI170S01-A01 1 Revision History Date 10.02.2005 23.05.2005 Rev.No. 0 1 Description First release of datasheet Final release Page 2 General Description The DI170S01-A01 from Distec’s CompactPanel Series is an open frame monitor providing an analog RGB interface for 17” SXGA TFT LCD panels with a high quality screen image. This monitor supports from VGA to UXGA resolution at a maximum of 85Hz refresh rate (refer to point 8.1) with automatic up- and downscaling function to full screen size.
User Manual DI170S01-A01 4 Absolute Ratings of Environment Item Storage temparature Operating temparature (Glass surface temperature) Shock (non-operating) Vibration (non-operating) Symbol TSTG TOPR Min. -25 0 Max. 60 50 Unit °C °C Note (1) (1) Snop Vnop - 50 1.5 G G (2), (4) (3), (4) Note (1) Temperature and relative humidity range are shown in the figure below. 90 % RH Max. (40 °C ≥ Ta) Maximum wet-bulb temperature at 39 °C or less. (Ta > 40 °C) No condensation.
User Manual DI170S01-A01 5 Electrical Specification 5.1 Panel Specification Item Type No. Size Active Display Area Number of Pixels Pixel Arrangement Pixel Pitch Color Depth Surface Treatments Viewing Angle Contrast Ratio Response Time (CR≥ 10) Average Brightness Frame Rate Panel Dimension CCFL Description Samsung LTM170EU-L21 17” Diagonal 337.92 x 270.336 1280 (H) x 1024 (V) RGB Vertical Stripe 0.264 x 0.264 16.
User Manual DI170S01-A01 5.4 Connector Pin Assignment 5.4.1 CN6: DC Input Part No. PHR-4 (JST) 5.4.2 Description GND Vcc(12V/5A) Remarks CN1: Analog RGB Input Part No. S13B-PH-SM3-TB (JST) 5.4.3 Pin No. 1,2 3,4 Pin No.
User Manual DI170S01-A01 6 Mechanical Specification 6.1 Front view DI170S01-A01 Product No.
User Manual DI170S01-A01 6.2 Back Side View DI170S01-A01 Product No.
User Manual DI170S01-A01 6.3 Side View 1 DI170S01-A01 Product No.
User Manual DI170S01-A01 6.4 Side View 2 DI170S01-A01 Product No.
User Manual DI170S01-A01 7 Operation Guide 7.1 Installation This monitor is designed for RGB monitor using 17” TFT LCD panel. This section provides some guidelines for assembly and preparation of a finished display solution. Before proceeding, it is important to familiarize yourself with the parts making up a system and the various connectors, mounting holes and general layout of the monitor. Please follow the below procedure. 1. 2. 3. 4.
User Manual DI170S01-A01 3. 4. 5. 7.2.2 After selecting a sub menu, use the Left or Right buttons to move through the sub menu. To select a setting icon, press the Menu button after your selection. The selected icons are highlighted and explained via onscreen text in the lower right of the OSD screen. There are two types of icons: Some have a single function and must be confirmed with the Menu button, the other option are setting bars.
User Manual DI170S01-A01 7.2.3 Window structure Input Timing Main Menu Info Main Menu Exit Icon Sub Menu Info Sub Menu Icons Available OSD controller boards 7.2.4 Detailed description of the On-Screen-Menu The following paragraphs describe the OSM main and sub-menus and the associated functions.
User Manual DI170S01-A01 Brightness – Contrast - Brightness: Adjusts display brightness. If supported, brightness will be regulated using the connected inverter. Contrast: Adjusts image contrast Black Level: Adjusts image black level Color - Autoconfiguration: Performs a calibration of the ADC for optimum colors. For best result, black and white level should be present in the image.
User Manual DI170S01-A01 Image - Autoconfiguration: Optimizes the displayed image. Adjusts phase and image position automatically. Width: Adjusts image width. Phase: Adjusts image phase. Horizontal position: Adjusts horizontal image position. Vertical position: Adjusts vertical image position Tools & OSD - - OSD • • • • OSD Timeout: The OSD vanishes after a certain time of inactivity.
User Manual DI170S01-A01 8 Appendix 8.1 Standard Timing Chart Mode Active Resolution Total Horizontal H- Vertical V- Pixel Failsafe Pixels Frequency Pol. Freq Pol.