Owner`s manual
10
light output. Please do not aempt to disassemble the light head. Do not
remove the glass lens or tamper with the LED module or electronics. Taking
apart your Eos will void the warranty and may damage the internal circuitry of
the LED module.
Eos LED Light Head
The Eos features two aachment locaons for bolt
snaps. One on the light head which is similar to the
21 and 50-wa HID light heads. The second e-o
point is cleverly designed as a Halcyon chevron and
is located on the Goodman handle.
Video Light heads
Halcyon's Apollo series are available with dual/single lamp HID and HMI
light heads. Dual head Apollo systems are ready for mounng on housing
arms with standard hardware. The HMI lamp is truly an underwater moon
picture studio lighng instrument, with output exceeding that of a 1,000 wa
halogen burning at a solid 5,600K.
Halcyon Bulb Replacement
21 watt HID Bulb Replacement
Should the bulb in your Halcyon 21 wa HID light become damaged, it can
be easily replaced by following these simple steps:
1. Remove the Goodman handle and reector assembly from the light head.
2. Carefully remove the bulb cover (test tube) from the slug assembly. Pull
the cover straight o; a twisng acon is more likely to break the glass tube.
It is advisable to use a protecve barrier such as a leather glove or heavy rag
to protect your hand from a possible break in the glass lamp cover. Be espe-
cially careful with the HID bulb as care needs to be used to prevent breaking
the bulb.
3. Visually inspect the bulb (HID) for damage. To remove the bulb from the
ballast assembly, unscrew the bulb retaining ring. Be careful not to drop the
bulb as the retaining ring is taken o. When the ring is removed grasp the
lamp base and remove the bulb from the socket.
4. Open the package containing the new bulb. Grasp the bulb base and
insert the bulb into the socket. Replace the bulb retaining ring, nger ght.
(See Figures 1-3) Do not overghten.
5. Wipe the bulb assembly O-rings clean with a cloth. Wipe out any moisture