User`s manual

6. Viewer
170/402
_________________________________________________
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
Parameter Values Description
SVSEncTypeName
[]
name of logical encoder type defined in EncoderTypes.ini, covers
the following settings
SVSPid
[0,…] program id (0 special meaning: auto)"
SVSPort
[] network: port number to listen for stream
SVSProtocolId
[0|1] network: IP-Protocol index 0: udp (default), 1: tcp
SVSSkipAtEnd
[0,…]
encoder type: number of bytes to skip at end of each IP-Packet
(0 is default)
SVSSkipAtStart
[0,…]
encoder type: number of bytes to skip at start of each IP-Packet
(0 is default)
SVSSrcName
[] name of logical streaming source defined in DigitalStream-
Sources.ini
SVSStreamProtocolId
[0,..3]
stream protocol id 0:auto (default), 1: elementary, 2: program,
3: transport
Transparency [0..255]
number to change the alpha (transparency) of the insertion (0 is
default)
VideoNorm [] Name of the video standard the video is forced to use if Auto-
Detect is disabled
VideoSourceRatioToFor-
ceTo
[0|1|2] Tithe parameter determines how to interpret the source extend:
0: use the extend of the sampled source (default, the compati-
ble mode compared to versions < 1.8)
1: force to ratio 4:3 by adjusting the height
2: force to ratio 16:9 by adjusting the height
WndFreeze [0|1]
Freeze frame
0: Continues playback
1: Frame is stopped
WndScaleMode [1..3] Scaling types of the selected section:
1: Native size/resolution
2: Preserve aspect ratio
3: Fit window
WndViewPort
[Left, Top,
Right, Bottom]
Selected section (position indicated in boundary values left,
right, top, bottom); each with a possible range of 0 to 100.
WndViewPortRatio [1..6] Predefined aspect ratios for the selected section:
1: Any
2: 4:3
3: 41:47
4: 16:9
5: 41:18
6: 41:17