User`s manual

6. Viewer
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
_________________________________________________
171/402
6.14.2 Visu Viewer parameters
Parameter Values Description
Brightness [1..100] Brightness (in percent)
Contrast [1..100] Contrast (in percent)
DeviceName [] Name of the Visu device in the control room database
Hue [1..100] Hue (in percent; only with NTSC)
hwFrameRateDivider [0..3]
Frame refresh factor
0: 1
1: 1/2
2: 1/4
3: 1/8
hwFrameRateReduc-
tionMax
[0..4] Reserved for future use
IPUs [] Number(s) of the Visu input card(s); separator is ":"
RGBBlueCoarseGain [0..100]
number to calibrateRGB insertion
blue coarse gain
RGBBlueCoarseGainOff-
set
[0..100] number to calibrateRGB insertion
blue coarse offset gain
RGBBlueCutOff [0..100] number to calibrateRGB insertion
blue cut off
RGBBlueCutOffOffset [0..100]
number to calibrateRGB insertion
blue cut off offset
RGBBlueFineGain [0..100] number to calibrateRGB insertion
blue fine gain
RGBBlueFineGainOffset [0..100] number to calibrateRGB insertion
blue fine offset gain
RGBGreenCoarseGain [0..100]
number to calibrateRGB insertion
green coarse gain
RGBGreenCoarse-
GainOffset
[0..100] number to calibrateRGB insertion
green coarse offset gain
RGBGreenCutOff [0..100] number to calibrateRGB insertion
green cut off
RGBGreenCutOffOffset [0..100]
number to calibrateRGB insertion
green cut off offset
RGBGreenFineGain [0..100] number to calibrateRGB insertion
green fine gain
RGBGreenFineGainOffset [0..100] number to calibrateRGB insertion
green fine offset gain
rgbHorzPhase [1..511] Horizontal phase
rgbHorzRes [1..1280] Horizontal resolution
rgbHorzTotalPixels [1..2047] Sum of pixels (visible and hidden)
rgbInputType [0|1] [0…2] Disables/enables RGB input