User`s manual

6. Viewer
Barco – Apollo – DOC-3197-2 – user's manual – Revision 08 – November 2006
_________________________________________________
175/402
Default is Ctrl+F3
HotKeyDefinitionDis-
connect
[{ctrl+} {f1 | f2
|,…|, f12}]
[{ctrl+} {f1 | f2 |,…|, f12}], specify the hot key for the action. Hot
keys can only be accepted if the resulting settings do not contain
any duplicates.
Default is F12
HotKeyDefinitionRe-
leaseControl
[{ctrl+} {f1 | f2
|,…|, f12}]
[{ctrl+} {f1 | f2 |,…|, f12}], specify the hot key for the action. Hot
keys can only be accepted if the resulting settings do not contain
any duplicates.
Default is F11
HotKeyDefinition-
ShowUserManual
[{ctrl+} {f1 | f2
|,…|, f12}]
[{ctrl+} {f1 | f2 |,…|, f12}], specify the hot key for the action. Hot
keys can only be accepted if the resulting settings do not contain
any duplicates.
Default is F1
HotKeyEnabledAltEsc
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledAltTab
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledConnect
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledCtrlAltDel
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledCtrlEsc
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledDiscon-
nect
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabledRelease-
Contol
[1|0] specify if to handle the hot key, default is enabled
HotKeyEnabled-
ShowUserManual
[1|0] specify if to handle the hot key, default is enabled
HotKeyResetToDefault
[1|0] specify if to handle the hot key, default is enabled
JPEGCompression [0, 1] 0: disabled, 1: enabled
JPEGCompressionLevel [0, …9] 0: best quality
JpegQualityLevel [] Define Jpeg Quality level (compression, 0: best quality)
Password [] Password of the workstation to be displayed
RegionH [0….] Define height of the region to be scraped
RegionW [0….] Define width of the region to be scraped
RegionX [0….] Define x position of the region to be scraped
RegionY [0….] Define y position of the region to be scraped
ScrapingMode [0, 1, 2] 0: full screen, 1: window, 2: region
UpdateModeManual-
TimeInterval
[1|60]
set update poll time interval if in manual mode, default is 10
UpdateModeModus
[1|2]
set the update mode: 1:Automatic (default), 2:Manual
UseCustomCompression [0, 1] 0: disabled, 1: enabled (increases CPU load on host/client side)
UseCustomCompres-
sionLevel
[0, …9] 0: disabled, 1: enabled (increases CPU load on host/client side)
WndScaleMode [1, 2, 3] 1: native resolution, 2: native aspect ratio, 3: free scaled